FORMAT_EN_2023-25_WCT_Light

Additional freight charges may apply for articles over 110 cm. Articles marked with ◊ are not stock items, they are procured at short notice. 1/323 Design: With centre cut, suitable for drilling. Application: Can be used for peripheral milling, trimming and highprecision finishing. The 45° spiral results in a soft and peeling cut and thus a high surface quality. Burr formation on the cutting edges is avoided. Universal tool. Use STEEL INOX CAST SPEC. ALLOY NON-FERROUS METAILS HARDENED STEEL Order No. < 700 N/mm2 < 1000 N/mm2 < 1400 N/mm2 ferrite/ martens. Austenitic Duplex GG/ GTS GGG Titanium > 850 N/mm2 Alu < 8% Si Alu > 8% Si Copper/ copper-alloy Graphite GFK/CFK/ Duropl. < 55 HRC < 60 HRC > 60 HRC VC [m/min] 11811887 67 67 – – – 105 450 360 220 – – – – 2383 170 100 – 100 – – 160 120 – 220 160 160 – – – – 2349 170 100 – 100 – – 160 120 – 220 160 160 – – – – 2350 ∅ d1 = h10 mm Cutting length l2 mm Total length l1 mm Shank ∅ d2 = h6 mm Number of teeth STEEL < 700 N/mm2 fz mm 2383 2349 2350 Order No. € € € 6 13 57 6 6 0.03 29.20 14.70 – …0600 8 19 63 8 6 0.04 36.90 17.70 – …0800 10 22 72 10 6 0.05 55.30 30.40 – …1000 12 26 83 12 6 0.065 75.10 35.50 – …1200 14 26 83 14 6 0.065 94.00 – – …1400 16 32 92 16 6 0.075 126.50 62.70 – …1600 16 65 120 16 6 0.075 – – 105.00 …1600 18 32 92 18 8 0.075 148.00 – – …1800 20 38 104 20 8 0.1 185.50 88.20 – …2000 20 75 135 20 8 0.1 – – 139.00 …2000 (W212) (W033) (W033) TiAlN AlTiN+ AlTiN+ Milling cutter, 45° 45° 2349/ 2350 2383 Solid carbide N 6–8 DIN 6527 DIN 6535-HB Solid carbide milling cutters 1.9

RkJQdWJsaXNoZXIy NTg4MTI=