Additional freight charges may apply for articles over 110 cm. Articles marked with ◊ are not stock items, they are procured at short notice. 1/275 Ø x width x bore mm Teeth and tooth form Number NL/Ø/circular pitch mm Tooth pitch T mm 1819 1838 1839 Order No. € € € 350 x 3 x 40 140 HZ 2/8/55 + 4/12/64 8 194.50 359.00 – …0047 350 x 3 x 40 180 HZ 2/8/55 + 4/12/64 6 194.50 359.00 – …0049 400 x 3.5 x 50 100 HZ 4/15/80 + 4/15/85 12 – 550.50 – …0051 400 x 3.5 x 50 140 HZ 4/15/80 + 4/15/85 9 – 550.50 – …0053 400 x 3.5 x 50 180 HZ 4/15/80 + 4/15/85 7 – 550.50 – …0055 450 x 4 x 50 100 HZ 4/15/80 + 4/15/85 14 – 873.50 – …0057 (W239) (W242) (W242) PVD TiN TiAlN Continued Metal circular saw blade Design: Segments hardened and repeatedly annealed to 63–65 HRC. Body made of hardened and tempered special steel with a strength of approx. 1400 N/mm2. The extremely tapered relief grinding of the segments in conjunction with the ground cooling channels ensures optimum coolant feed to the cutting area and thus guarantees optimum stock removal. Tooth form HZ = Curved tooth with roughing and finishing teeth. Application: Particularly suitable for machines with powerful drive capacities and changing material cross-sections. Note: Always use sufficient coolant. Use STEEL INOX CAST SPEC. ALLOY NON-FERROUS METAILS HARDENED STEEL Order No. < 700 N/mm2 < 1000 N/mm2 < 1400 N/mm2 ferrite/ martens. Austenitic Duplex GG/ GTS GGG Titanium > 850 N/mm2 Alu < 8% Si Alu > 8% Si Copper/ copper-alloy Graphite GFK/CFK/ Duropl. < 55 HRC < 60 HRC > 60 HRC VC [m/min] 40 25 – – – – – – – 700 600 200 – – – – 1841 Ø x thickness x bore mm Number of teeth HZ Number NL/Ø/ circular pitch mm Tooth pitch T mm 1841 Order No. € 275 x 3 x 40 96 2/8/55 + 4/12/64 9 435.00 …0001 275 x 3 x 40 120 2/8/55 + 4/12/64 7 435.00 …0003 275 x 3 x 40 144 2/8/55 + 4/12/64 6 435.00 …0005 315 x 3.6 x 40 70 2/8/55 + 4/12/64 14 524.00 …0007 315 x 3.6 x 40 87 2/8/55 + 4/12/64 12 524.00 …0009 315 x 3.6 x 40 112 2/8/55 + 4/12/64 9 524.00 …0011 315 x 3.6 x 40 140 2/8/55 + 4/12/64 7 524.00 …0013 360 x 3.6 x 50 96 4/15/80 + 4/15/85 12 562.00 …0015 (W242) Ø x thickness x bore mm Number of teeth HZ Number NL/Ø/ circular pitch mm Tooth pitch T mm 1841 Order No. € 360 x 3.6 x 50 128 4/15/80 + 4/15/85 9 562.00 …0017 360 x 3.6 x 50 160 4/15/80 + 4/15/85 7 562.00 …0019 400 x 4 x 50 80 4/15/80 + 4/15/85 16 607.50 …0021 400 x 4 x 50 96 4/15/80 + 4/15/85 13 607.50 …0023 400 x 4 x 50 128 4/15/80 + 4/15/85 10 607.50 …0025 450 x 4 x 50 90 4/15/80 + 4/18/100 16 929.50 …0027 450 x 4 x 50 108 4/15/80 + 4/18/100 13 929.50 …0029 450 x 4 x 50 144 4/15/80 + 4/18/100 10 929.50 …0031 (W242) bright bright Segmental circular saw blade HSS DMo5 bright Design: High quality saw blades with solid carbide JEPSON-Dry Cutter-cold circular saws, also for universal use. Without pin holes. Special tooth form. Application: Saw blades particularly suited for dry cut in metal. Saw fast, with little burr and without cooling. Steel, non-ferrous metals, composites and plastic, cable channels. Achieve high cutting quality and long tool lives. (Observe speeds, see table.) Use STEEL INOX CAST SPEC. ALLOY NON-FERROUS METAILS HARDENED STEEL Order No. < 700 N/mm2 < 1000 N/mm2 < 1400 N/mm2 ferrite/ martens. Austenitic Duplex GG/ GTS GGG Titanium > 850 N/mm2 Alu < 8% Si Alu > 8% Si Copper/ copper-alloy Graphite GFK/CFK/ Duropl. < 55 HRC < 60 HRC > 60 HRC VC [m/min] 1400 1200 – 900 900 – 900 900 – 1400 1400 1200 – – – – 1842 Ø x thickness x bore mm Revolving speed rpm Cutting speed m/minute Number of teeth 1842 Order No. € 305 x 2.4/2 x 25.4 1300 1200 60 243.50 …0001 305 x 2.4/ 2 x 25.4 1300 1200 80 254.50 …0003 355 x 2.6/2.2 x 25.4 1300 1400 80 298.00 …0005 355 x 2.6/2.2 x 25.4 1300 1400 90 317.00 …0007 (W242) Circular saw blade Carbide Metal saw belts and metal saw blades 1.7
RkJQdWJsaXNoZXIy NTg4MTI=