FORMAT_EN_2023-25_WCT_Light

All prices quoted are non-binding recommended prices. 1/276 Use STEEL INOX CAST SPEC. ALLOY NON-FERROUS METAILS HARDENED STEEL Order No. < 700 N/mm2 < 1000 N/mm2 < 1400 N/mm2 ferrite/ martens. Austenitic Duplex GG/ GTS GGG Titanium > 850 N/mm2 Alu < 8% Si Alu > 8% Si Copper/ copper-alloy Graphite GFK/CFK/ Duropl. < 55 HRC < 60 HRC > 60 HRC VC [m/min] – – – – – – – – – 50 40 30 – – – – 2680 – – – – – – – – – 50 40 30 – – – – 2683 Ø x thickness x bore mm Number of teeth Number NL/Ø/circular pitch mm Tooth pitch T 2680 Order No. € 250 x 3.2 x 30 60 2/7/42 + 2/9.5/46.5 + 2/10/60 13.08 129.50 …0001 250 x 3.2 x 30 80 2/7/42 + 2/9.5/46.5 + 2/10/60 9.81 149.50 …0004 250 x 3.2 x 32 60 2/7/42 + 2/9.5/46.5 + 2/10/60 13.08 128.00 …0007 250 x 3.2 x 32 80 2/7/42 + 2/9.5/46.5 + 2/10/60 9.81 148.00 …0010 275 x 3.4 x 40 72 2/9/55 + 4/12/64 11.99 141.00 …0016 300 x 3.2 x 30 72 2/7/42 + 2/9.5/46.5 + 2/10/60 13.08 157.00 …0019 300 x 3.2 x 40 96 2/9/55 + 4/12/64 9.81 180.50 …0031 350 x 3.6 x 30 84 2/7/42 + 2/9.5/46.5 + 2/10/60 13.08 195.50 …0034 350 x 3.6 x 32 84 2/7/42 + 2/9.5/46.5 + 2/10/60 13.08 193.50 …0037 350 x 3.6 x 32 108 2/7/42 + 2/9.5/46.5 + 2/10/60 10.18 215.50 …0040 350 x 3.6 x 40 84 2/9/55 + 4/12/64 13.08 195.50 …0043 350 x 3.6 x 40 108 2/9/55 + 4/12/64 10.18 213.50 …0046 400 x 3.6 x 40 96 2/9/55 + 4/12/64 13.08 199.00 …0055 420 x 4 x 40 96 2/9/55 + 4/12/64 13.74 275.00 …0061 500 x 4 x 30 120 2/10.5/70 13.08 340.50 …0064 ​ (W242) Circular saw blade Carbide 2680 Trapezoidal flat tooth, positive The cutting speed should not be below 50 m/s for aluminium and 30-40 m/s for solid material. Mainly for use on circular saw benches which cut against the direction of feed. For profiles and solid material, format, mitre and longitudinal cuts in aluminium and other non-ferrous metals as well as for cutting synthetic resins, mainly thicker cross-sections. 2683 Trapezoidal flat tooth, negative The cutting speed should not be below 50 m/s for aluminium and 30-40 m/s for solid material. Mainly for use on mitre saws with oscillating saw blades or other circular saw benches which cut against the direction of feed. For thin-walled profile made of aluminium and plastic, particularly anodised profiles. Tooth form = trapezoidal-flat-negative -4° Tooth form = trapezoidal-flat-positive 5° Ø x thickness x bore mm Number of teeth Number NL/Ø/circular pitch mm Tooth pitch T 2683 Order No. € 250 x 3.4 x 30 60 2/7/42 + 2/9.5/46.5 + 2/10/60 13.08 114.00 …0001 250 x 3.4 x 30 80 2/7/42 + 2/9.5/46.5 + 2/10/60 9.81 130.50 …0004 250 x 3.4 x 32 60 2/7/42 + 2/9.5/46.5 + 2/10/60 13.08 118.00 …0007 250 x 3.2 x 32 80 2/7/42 + 2/9.5/46.5 + 2/10/60 + 2/12/64 9.81 132.00 …0010 275 x 3.4 x 40 72 2/9/55 + 4/12/64 11.99 140.00 …0016 300 x 3.4 x 30 72 2/7/42 + 2/9.5/46.5 + 2/10/60 13.08 146.50 …0019 300 x 3.2 x 30 96 2/7/42 + 2/9.5/46.5 + 2/10/60 9.81 167.50 …0022 300 x 3.2 x 32 96 2/7/42 + 2/9.5/46.5 + 2/10/60 + 2/12/64 9.81 164.50 …0028 300 x 3.2 x 40 96 2/7/42 + 2/9.5/46.5 + 2/10/60 + 2/12/64 9.81 164.50 …0031 330 x 3.4 x 32 96 2/7/42 + 2/9.5/46.5 + 2/10/60 10.36 217.00 …0034 350 x 3.4 x 30 84 2/7/42 + 2/9.5/46.5 + 2/10/60 13.08 185.00 …0037 350 x 3.8 x 32 84 2/7/42 + 2/9.5/46.5 + 2/10/60 + 2/12/64 13.08 189.00 …0040 350 x 3.4 x 32 108 2/12/64 + 2/9/55 10.18 195.50 …0043 350 x 3.4 x 40 84 2/9/55 + 4/12/64 13.08 189.00 …0046 350 x 3.4 x 40 108 2/9/55 + 4/12/64 10.18 193.50 …0049 350 x 3.4 x 50 84 4/15/80 13.08 185.00 …0052 400 x 3.4 x 40 96 4/12/64 13.08 288.50 …0058 500 x 4.4 x 30 120 2/7/42 + 2/9.5/46.5 + 2/10/60 + 2/10.5/70 13.08 376.50 …0067 ​ (W242) Metal saw belts and metal saw blades 1.7

RkJQdWJsaXNoZXIy NTg4MTI=