FORMAT_EN_2023-25_WCT_Light

All prices quoted are non-binding recommended prices. 1/274 Design: Bore H7 accordance with DIN 1840, hollow-ground. The base material is laser-cut with a bright surface finish. Hardened and multiple times tempered to 63-65 HRC. Use STEEL INOX CAST SPEC. ALLOY NON-FERROUS METAILS HARDENED STEEL Order No. < 700 N/mm2 < 1000 N/mm2 < 1400 N/mm2 ferrite/ martens. Austenitic Duplex GG/ GTS GGG Titanium > 850 N/mm2 Alu < 8% Si Alu > 8% Si Copper/ copper-alloy Graphite GFK/CFK/ Duropl. < 55 HRC < 60 HRC > 60 HRC VC [m/min] 85 – – 20 15 – – – – – – – – – – – 1819 40 25 – 25 20 – 40 40 – 700 600 200 – – – – 1838 50 30 – 25 25 – 40 40 15 700 600 250 – – – – 1839 Ø x width x bore mm Teeth and tooth form Number NL/Ø/circular pitch mm Tooth pitch T mm 1819 1838 1839 Order No. € € € 225 x 2 x 32 120 HZ 2/8/45 + 4/9/50 + 2/12/64 6 – 151.50 – …0001 225 x 2 x 32 180 BW 2/8/45 + 4/9/50 + 2/12/64 4 – 151.50 – …0003 250 x 2 x 32 128 BW 2/8/45 + 4/9/50 + 2/12/64 4 – 162.50 – …0007 250 x 2 x 32 128 HZ 2/8/45 + 4/9/50 + 2/12/64 6 87.40 – 166.50 …0005 250 x 2 x 32 200 BW 2/8/45 + 4/9/50 + 2/12/64 4 87.40 – 166.50 …0007 250 x 2 x 32 200 HZ 2/8/45 + 4/9/50 + 2/12/64 6 – 162.50 – …0005 275 x 2 x 32 140 HZ 2/8/45 + 4/9/50 + 2/12/64 6 92.60 182.50 187.00 …0009 275 x 2 x 32 220 BW 2/8/45 + 4/9/50 + 2/12/64 4 92.60 182.50 187.00 …0011 275 x 2.5 x 40 110 HZ 2/8/55 + 4/12/64 8 97.30 197.50 202.00 …0013 275 x 2.5 x 40 140 HZ 2/8/55 + 4/12/64 6 97.30 197.50 202.00 …0015 275 x 2.5 x 40 180 HZ 2/8/55 + 4/12/64 5 97.30 197.50 202.00 …0017 275 x 2.5 x 40 220 BW 2/8/55 + 4/12/64 4 97.30 197.50 202.00 …0019 300 x 2.5 x 32 120 HZ 2/8/45 + 4/9/50 + 2/12/64 8 128.50 250.00 255.00 …0021 300 x 2.5 x 32 160 HZ 2/8/45 + 4/9/50 + 2/12/64 6 128.50 250.00 255.00 …0023 300 x 2.5 x 32 220 BW 2/8/45 + 4/9/50 + 2/12/64 4 128.50 – – …0025 300 x 2.5 x 32 240 BW 2/8/45 + 4/9/50 + 2/12/64 4 – 250.00 255.00 …0025 300 x 2.5 x 40 120 HZ 2/8/55 + 4/12/64 8 128.50 250.00 255.00 …0027 300 x 2.5 x 40 160 HZ 2/8/55 + 4/12/64 6 128.50 250.00 255.00 …0029 300 x 2.5 x 40 220 BW 2/8/55 + 4/12/64 4 128.50 – – …0031 300 x 2.5 x 40 240 BW 2/8/55 + 4/12/64 4 – 250.00 255.00 …0031 315 x 2.5 x 32 120 HZ 2/8/45 + 4/9/50 + 2/12/64 8 143.50 278.50 286.00 …0033 315 x 2.5 x 32 160 BW 2/8/45 + 4/9/50 + 2/12/64 6 – 278.50 286.00 …0035 315 x 2.5 x 32 160 HZ 2/8/45 + 4/9/50 + 2/12/64 6 143.50 – – …0035 315 x 2.5 x 32 240 BW 2/8/45 + 4/9/50 + 2/12/64 4 143.50 – – …0037 315 x 2.5 x 32 250 BW 2/8/45 + 4/9/50 + 2/12/64 4 – 278.50 286.00 …0037 315 x 3 x 40 120 HZ 2/8/55 + 4/12/64 8 158.50 330.50 338.00 …0039 315 x 3 x 40 160 HZ 2/8/55 + 4/12/64 6 158.50 330.50 338.00 …0041 315 x 3 x 40 240 BW 2/8/55 + 4/12/64 4 158.50 – – …0043 315 x 3 x 40 250 BW 2/8/55 + 4/12/64 4 – 330.50 338.00 …0043 350 x 3 x 40 110 HZ 2/8/55 + 4/12/64 10 194.50 359.00 – …0045 ​ (W239) (W242) (W242) PVD TiN TiAlN Metal circular saw blade Continued on next page HSS DMo5 BW = curved tooth alternately bevelled up to 4 mm tooth pitch. HZ = curved tooth with roughing and finishing teeth for all tooth pitches over 4 mm 1819 PVD bravo line, wear-resistant coating according to the PVD process as protection against material pick-up, to improve tool life and use of coolant. Application: Can be used on manual, semi-automatic and fully automatic sawing machines. 1838 TiN Very powerful "Eco", highly wear-resistant TiN Plus coating, to protect against material build-up, for improved tool life and good absorption of coolant. Application: Can be used on manual, semi-automatic and fully automatic sawing machines. 1839 TiAlN Highly durable TiAlN-coating. With significantly reduced friction coefficient and greater temperature resistance. Application: Outstandingly for automatic sawing machines and for the use of minimum quantity lubrication / minimum quantity cooling. The highly wear-resistant coating and improved gliding properties make it the preferred choice for permanent use / serial cutting. Permits higher cutting speeds and feeds while increasing tool life. 1839 TiAlN 1838 TiN 1819 PVD Metal saw belts and metal saw blades 1.7

RkJQdWJsaXNoZXIy NTg4MTI=