All prices quoted are non-binding recommended prices. 1/258 Drilling Drill out damaged thread with the V-COIL rapid jobber drills. Control the tap and thread bolt for the same thread and gradient. Thread cut the mounting thread in the bored out hole with the special V-COIL taps. The use of cutting oil is recommended. Installing the threaded insert: Place the insert on the installation tool and turn open. Then turn in the threaded insert applying light pressure. Breaking the pin: After installation, take the insertion tool out using a cordless screwdriver turning to the left and remove the carrier pin with the pin breaker. After completing these steps, a thread is produced that is often better and stronger than the original thread due to the narrow and exact tolerances as well as the spring thread forming. Application: Thread armouring of materials with low shearing resistance e.g. aluminium and magnesium alloys, in mechanical engineering, in automobile, electro and medical technology and in aviation and aerospace. Thread repair of damaged or worn threads. Reject recovery. Scope of delivery: In a plastic cassette: tap, jobber drill in core hole dimensions, installation tool, pin breaker each with 1/4" hexagon mount, a universal holder with quick-change chuck and thread inserts. Size Set content 1654 Order No. € M3 1 tap M3; 1 jobber drill 3.2 mm; 1 installation tool with 1/4" hexagon mount; 1 pin breaker; 1 universal holder; 10 threaded inserts 1.5 x D 24.20 …0100 M4 1 tap M4; 1 jobber drill 4.2 mm; 1 installation tool with 1/4" hexagon mount; 1 pin breaker; 1 universal holder; 10 threaded inserts 1.5 x D 24.70 …0110 M5 1 tap M5; 1 jobber drill 5.2 mm; 1 installation tool with 1/4" hexagon mount; 1 pin breaker; 1 universal holder; 10 threaded inserts 1.5 x D 24.60 …0120 M6 1 tap M6; 1 jobber drill 6.3 mm; 1 installation tool with 1/4" hexagon mount; 1 pin breaker; 1 universal holder; 10 threaded inserts 1.5 x D 26.60 …0130 M8 1 tap M8; 1 jobber drill 8.3 mm; 1 installation tool with 1/4" hexagon mount; 1 pin breaker; 1 universal holder; 10 threaded inserts 1.5 x D 33.80 …0140 M10 1 tap M10; 1 jobber drill 10.4 mm; 1 installation tool with 1/4" hexagon mount; 1 pin breaker; 1 universal holder; 10 threaded inserts 1.5 x D 38.00 …0150 M12 1 tap M12; 1 jobber drill 12.4 mm; 1 installation tool with 1/4" hexagon mount; 1 pin breaker; 1 universal holder; 6 threaded inserts 1.5 x D 41.30 …0160 (W159) Thread repair set, V-Coil rapid 1/4" HSS DIN 8140 Dies and holding tools 1.6
RkJQdWJsaXNoZXIy NTg4MTI=