Additional freight charges may apply for articles over 110 cm. Articles marked with ◊ are not stock items, they are procured at short notice. 1/259 Set content 1654 Order No. € M6–M10 109.00 …1100 M5–M12 171.50 …1000 (W159) 1654 1000 Drilling Drill out damaged thread with the V-COIL rapid jobber drills. Control the tap and thread bolt for the same thread and gradient. Thread cut the mounting thread in the bored out hole with the special V-COIL taps. The use of cutting oil is recommended. Installing the threaded insert: Place the insert on the installation tool and turn open. Then turn in the threaded insert applying light pressure. Breaking the pin: After installation, take the insertion tool out using a cordless screwdriver turning to the left and remove the carrier pin with the pin breaker. After completing these steps, a thread is produced that is often better and stronger than the original thread due to the narrow and exact tolerances as well as the spring thread forming. Application: Thread armouring of materials with low shearing resistance e.g. aluminium and magnesium alloys, in mechanical engineering, in automobile, electro and medical technology and in aviation and aerospace. Thread repair of damaged or worn threads. Reject recovery. Scope of delivery: in a plastic cassette: tap, jobber drill in core hole dimensions, installation tool, pin breaker each with 1/4" hexagon mount, a universal holder with quick-change chuck and thread inserts (1.5 x D). Thread repair set, V-Coil rapid 1654 1100 Design: Lubricant for metalwork. Drilling paste as twist pen. Application: For sheet jobber drill, subland drill, countersink bits. Drilling paste 9655 Order No. € 20 ml twist pen 6.40 …0100 (W124) Drilling paste Design: The cutting oil spray provides excellent cutting and cooling effect. It increases the surface quality and tool life. Application: Especially suitable for drilling, turning, milling and thread cutting of hard and brittle materials. Content ml 9655 Order No. € 50 3.76 …0105 (W001) Cutting oil spray HSS DIN 8140 Design: Chlorine- and mineral oil-free, vegetablebased. Application: Especially for medium to heavy machining of high-alloy steels. In addition to its use on highalloy and stainless steels, it also shows excellent results when machining chrome-nickel steel, titanium and manganese-carbon steels. Excellent for drilling, tapping, reaming, grooving, countersinking, turning, milling and sawing. Allround high-performance cutting oil spray PROm Design: Chlorine, washable with water. Application: Suitable for all ferrous and non-ferrous metals e.g. steel, unalloyed or alloyed, all types of cast iron: Cast steel, malleable cast iron, die cast iron, copper and its alloys, such as cast brass, gunmetal. Use also for all chrome-nickel alloys. Excellent for thread cutting, tapping, centring, broaching and reaming with reamers, drilling and milling. Drilling and cutting oil foam PRO Design 9655 Order No. € 400 ml spray can 12 C …0015 (W980) Content ml 9655 Order No. € 300 12 7.50 …0005 (W980) Dies and holding tools 1.6
RkJQdWJsaXNoZXIy NTg4MTI=