All prices quoted are non-binding recommended prices. 1/256 Drilling out damaged thread with normal jobber drills. Boring out is not required for spark plug threads - the combined drilling and cutting tool should be used. Please note that larger holes are required for taps. Control the tap and thread bolt for the same thread and gradient. Thread cut the mounting thread in the bored out hole with the special V-COIL taps. The use of cutting oil is recommended. Installing the threaded insert: Place the insert on the tool and make sure that the carrier pin is in the slot opening and then make the right setting with the adjustment ring. Then turn in the threaded insert in the thread direction applying light pressure. Do not turn against the running direction, as the pin can break off. Breaking the pin: After installation, take the insertion tool out and remove the carrier pin with the pin breaker. The pin should be removed with long nose pliers for larger dimensions and spark plug threads. After completing these steps, a thread is produced that is often better and stronger than the original thread due to the narrow and exact tolerances as well as the spring thread forming. Application: Thread armouring of materials with low shearing resistance e.g. aluminium and magnesium alloys, in mechanical engineering, in automobile, electro and medical technology and in aviation and aerospace. Thread repair of damaged or worn threads. Reject recovery. Scope of delivery: in a plastic cassette up to M12, and in a metal cassette from M14. Size Set content 1651 Order No. € M2 1 tap M2; 1 jobber drill 2.1 mm; 1 hand installation tool with fixing ring No. 2; 1 pin breaker No. 2; 20 threaded inserts 1.5 x D 25.80 …0100 M2.5 1 tap M2.5; 1 jobber drill 2.6 mm; 1 hand installation tool with fixing ring No. 3; 1 pin breaker No. 3; 20 threaded inserts 1.5 x D 24.70 …0110 M3 1 tap M3; 1 jobber drill 3.2 mm; 1 hand installation tool with fixing ring No. 4; 1 pin breaker No. 4; 20 threaded inserts 1.5 x D 24.70 …0120 M4 1 tap M4; 1 jobber drill 4.2 mm; 1 hand installation tool with fixing ring No. 6; 1 pin breaker No. 6; 20 threaded inserts 1.5 x D 24.70 …0130 M5 1 tap M5; 1 jobber drill 5.2 mm; 1 hand installation tool with fixing ring No. 8; 1 pin breaker No. 8; 20 threaded inserts 1.5 x D 25.70 …0140 M6 1 tap M6; 1 jobber drill 6.3 mm; 1 hand installation tool with fixing ring No. 9; 1 pin breaker No. 9; 20 threaded inserts 1.5 x D 27.80 …0150 M8 1 tap M8; 1 jobber drill 8.3 mm; 1 hand installation tool with fixing ring No. 11; 1 pin breaker No. 11; 20 threaded inserts 1.5 x D 35.30 …0160 MF8 x 1 1 tap MF8 x 1.0; 1 jobber drill 8.3 mm; 1 hand installation tool with fixing ring No. 11; 1 pin breaker No. 11; 20 threaded inserts 1.5 x D 35.30 …0170 (W159) Size Set content 1651 Order No. € M10 1 tap M10; 1 jobber drill 10.4 mm; 1 hand installation tool with fixing ring No. 13; 1 pin breaker No. 13; 15 threaded inserts 1.5 x D 37.70 …0180 MF10 x 1 1 tap MF10 x 1.0; 1 jobber drill 10.3 mm; 1 hand installation tool with fixing ring No. 13; 1 pin breaker No. 13; 15 threaded inserts 1.5 x D 37.70 …0190 M12 1 tap M12; 1 jobber drill 12.4 mm; 1 hand installation tool with fixing ring No. 15; 1 pin breaker No. 15; 10 threaded inserts 1.5 x D 42.30 …0200 M14 1 tap M14; 1 hand installation tool with fixing ring No. 16; 10 threaded inserts 1.5 x D 47.30 …0210 MF14 x 1.25 1 tap MF14 x 1.25; 1 hand installation tool with fixing ring No. 17; 10 threaded inserts 1.5 x D 47.30 …0230 M16 1 tap M16; 1 hand installation tool with fixing ring No. 18; 10 threaded inserts 1.5 x D 57.20 …0220 (W159) V-COIL thread repair set Dies and holding tools 1.6
RkJQdWJsaXNoZXIy NTg4MTI=