Additional freight charges may apply for articles over 110 cm. Articles marked with ◊ are not stock items, they are procured at short notice. 1/253 Design: Jaws set with spring for tool holder Order No. 1850. Size For square span mm 1850 Order No. € M1–M6 2.4–5.5 2.37 …0004 M6–M12 4.5–8 3.94 …0008 (W176) Spare jaw set with spring Design: Housing with large dimensions, clamping screws according to DIN sizes. Application: For directly mounting closed and slotted dies according to EN 22568 and EN 24801. Die holder for dies Ø x height mm For metric die stocks For metric, fine die stocks For Whitworth pipe die stocks For Whitworth die stocks For UNC die stocks For UNF die stocks Length mm 1844 1845 1867 Order No. € € € 16 x 5 M1–2.6 M2–2.5 – 1/16"–3/32" No. 1-3 No. 0-3 160 3.61 4.42 – …0001 16 x 5 M1–2.6 M2–2.5 – 1/16"–3/32" No. 1-3 No. 0-3 160 – – 5.80 …1001 20 x 5 M3–4 M3–4 – 1/8"–5/32 No. 4-5 No. 4-6 200 3.61 4.41 – …0003 20 x 5 M3–4 M3–4 – 1/8"–5/32" No. 4-5 No. 4-6 200 – – 5.80 …1003 20 x 7 M4,5–6 M5*–6* – 3/16"–1/4" Nr. 6–1/4" Nr. 8–1/4" 200 3.59 4.67 – …0005 20 x 7 M4,5–6 M5*–6* – 3/16"–1/4" Nr. 6–1/4" Nr. 8–1/4" 200 – – 7.05 …1005 25 x 9 M7–9 M7–9 – 5/16" 5/16" 5/16" 224 4.09 5.45 – …0007 25 x 9 M7–9 M7–9 – 5/16" 5/16" 5/16" 224 – – 7.05 …1007 30 x 11 M10–11 M10–11 G 1/8" 3/8"–7/16" 3/8"–7/16" 3/8"–7/16" 280 6.75 6.15 – …0009 30 x 11 M10–11 M10–11 G 1/8" 3/8"–7/16" 3/8"–7/16" 3/8"–7/16" 280 – – 8.60 …1009 38 x 10 – M12–15 G 1/4" – – 1/2"–9/16" 315 9.70 10.70 – …0011 38 x 14 M12–14 – – 1/2"–9/16" 1/2"–9/16" – 315 9.70 10.70 – …0013 38 x 14 M12–14 – – 1/2"–9/16" 1/2"–9/16" – 315 – – 13.85 …1013 45 x 14 – M16–20 G 3/8"-1/2" – – 5/8"–3/4" 450 11.90 14.05 – …0015 45 x 14 – M16–20 G 3/8"-1/2" – – 5/8"–3/4" 450 – – 21.00 …1015 45 x 18 M16–20 – – 5/8"–13/16 5/8"–3/4" – 450 11.90 14.05 – …0017 45 x 18 M16–20 – – 5/8"–13/16" 5/8"–3/4" – 450 – – 21.00 …1017 55 x 16 – M22–26 G 5/8"-3/4" – – 7/8"–1" 560 16.20 18.95 – …0019 55 x 16 – M22–26 G 5/8"-3/4" – – 7/8"–1" 560 – – 28.40 …1019 55 x 22 M22–24 – – 7/8"–1" 7/8"–1" – 560 16.20 18.95 – …0021 65 x 18 – M27–36 G 7/8"–1" – – 1.1/8"–1.1/2" 630 25.00 28.10 – …0023 65 x 18 – M27–36 G 7/8"–1" – – 1.1/8"–1.1/2" 630 – – 53.80 …1023 65 x 25 M27–36 – – 1.1/8"–1.3/8" 1.1/8"–1.1/2" – 630 25.00 28.10 – …0025 (W030) (W176) (W176) * Gradient 0.75 1844 Housing die-cast alloy, grey hammered coating, handles from size 20 x 5 mm made of galvanised, rust protected machine steel. Can be unscrewed from size 45 x 14. 1845 Burnished locking screws, knurled grips. High tensile strength due to low ductility. New high-strength honeycomb geometry. 1867 Body made of powder metal. 1867 1845 DIN 250 1844 DIN 250 Dies and holding tools 1.6
RkJQdWJsaXNoZXIy NTg4MTI=