FORMAT_EN_2023-25_WCT_Light

All prices quoted are non-binding recommended prices. 1/252 Design: Handbook with practical tips for everyday use, including the subjects of occupational safety, thread types, thread cutting mistakes, thread identification, repairs, terms and dimension explanations. DIN A6, over 60 pages, hardcover. Design 1796 Order No. € German 3.21 …0000 English 3.21 …1000 French 3.21 …2000 Dutch 3.21 …3000 Spanish 3.21 …4000 Polish 3.21 …5000 ​ (W001) Thread cutting handbook Design: The jaws are case-hardened and phosphated, with a removable and galvanised steel handle. Application: For mounting hand taps with a square drive. Use in difficult to access areas is possible as the steel handle can be unscrewed. Size DIN 352 DIN 5157 DIN 2184 Square span mm Length mm 1840 1843 1861 Order No. € € € 0 M1 – 8 – BSW 1/16"–1/4" 2 – 5 130 4.49 5.50 – …0001 1 M1 –10 G 1/8" BSW 1/16"–3/8" 2 – 6.3 176 5.30 6.50 – …0003 1.1/ 2 M1 –12 G 1/8" BSW 1/16"–1/2" 2.1– 8 176 5.30 6.50 9.40 …0005 2 M4 –12 G 1/8"-1/4" BSW 3/32"–1/2" 3 – 9 280 8.95 11.05 15.80 …0007 3 M5 –20 G 1/8"-1/2" BSW 7/32"–3/4" 4.9–12 380 16.30 18.30 25.40 …0009 4 M11–27 G 1/8"-3/4" BSW 7/16"–1" 5.5–16 500 26.50 29.60 41.20 …0011 5 M13–32 G 1/4"–1" BSW 1/2"–1.1/4" 7 –20 700 40.60 45.20 61.60 …0013 6 M18–42 G 1/2"-1.1/4" BSW 3/4"–1.1/2" 11 –24 1000 – – 109.00 …0015 7 M27–52 G 3/4"-1.3/4" BSW 1.1/8"–2" 16 –32 1250 – – 137.50 …0017 ​ (W030) (W176) (W176) Adjustable tap wrench DIN 1814 1840 Housing made of refined zinc die casting ZL 0410. For normal loads. 1843 With working hole to accommodate a spindle toggle for higher torques. Guide groove to hold the splint retainer and stabilise the adjustable jaw. High tensile strength due to low ductility. Adjustable jaw with splint retainer. 1861 Housing 1.1/2–2 forged from steel, housing 3-7 made from steel ST 37, welding construction. 1861 1843 1840 Design: Chrome-plated full steel design, the ratchet can be changed over from clockwise to counterclockwise motion or with central locking. With annealed, parallel clamping jaws and adjustable cross handle. Application: For clamping square shanks - particularly suitable for work in enclosed spaces due to the adjustable cross handle. Square span mm for tap shanks according to DIN for tap shanks according to ISO Total length mm 1850 Order No. € 2.4–5.5 M3–10 M1–6 85 11.95 …0001 2.4–5.5 M3–10 M1–6 250 19.70 …0003 4.5–8 M5–12 M6–12 100 16.05 …0005 4.5–8 M5–12 M6–12 300 26.00 …0007 ​ (W176) Tool holder Dies and holding tools 1.6

RkJQdWJsaXNoZXIy NTg4MTI=