FORMAT_EN_2023-25_WCT_Light

All prices quoted are non-binding recommended prices. 1/236 Design: With oil grooves. M3–M10 DIN 371 with reinforced shank. M12–M16 DIN 376 with overflow shank. Application: For regular metric threads according to DIN 13. Use STEEL INOX CAST SPEC. ALLOY NON-FERROUS METAILS HARDENED STEEL Order No. < 700 N/mm2 < 1000 N/mm2 < 1400 N/mm2 ferrite/ martens. Austenitic Duplex GG/ GTS GGG Titanium > 850 N/mm2 Alu < 8% Si Alu > 8% Si Copper/ copper-alloy Graphite GFK/CFK/ Duropl. < 55 HRC < 60 HRC > 60 HRC VC [m/min] 10 8 6 12 10 8 – 23 6 45 35 – – – – – 1780 10 8 6 12 10 8 – 23 6 45 35 – – – – – 1783 15 15 12 6 8 – – – 6 17 – – – – – – 1784 Thread Gradient mm Total length mm Shank ∅ mm Square shank mm Core hole ∅ mm 1780 1783 1784 Order No. € € € M3 0.5 56 3.5 2.7 2.8 25.10 37.80 58.40 …0001 M4 0.7 63 4.5 3.4 3.7 25.10 39.10 51.00 …0003 M5 0.8 70 6 4.9 4.65 26.50 40.70 52.60 …0005 M6 1 80 6 4.9 5.55 26.50 40.60 61.00 …0007 M8 1.25 90 8 6.2 7.4 31.20 49.30 68.50 …0009 M10 1.5 100 10 8 9.25 40.20 63.00 93.50 …0011 M12 1.75 110 9 7 11.2 48.20 74.90 114.50 …0013 M16 2 110 12 9 15 79.20 – 185.50 …0015 ​ (W170) (W170) (W165) TiN TiN TiCN Machine tap M HSS-E DIN 371 DIN 376 N 60° 2–3 C ≤ 3xd 1780 TiN Tolerance zone 6HX: Addition "X" indicates a special tolerance range for thread formers, as the deformed material tends to spring back. 1783 TiN Tolerance range 6GX with oversize 0.02–0.04 mm. For use with workpieces that tend to spring back when cutting, are galvanised or easily shrink when hardening. 1784 TiCN Tolerance zone 6HX: Addition "X" indicates a special tolerance range for thread formers, as the deformed material tends to spring back. 1784 TiCN 6HX 1783 TiN 6GX 1780 TiN 6HX Design: With oil grooves. Application: For metric precision threads according to DIN 13. Note: Tolerance zone 6HX: Addition "X" indicates a special tolerance range for thread formers, as the deformed material tends to spring back. Use STEEL INOX CAST SPEC. ALLOY NON-FERROUS METAILS HARDENED STEEL Order No. < 700 N/mm2 < 1000 N/mm2 < 1400 N/mm2 ferrite/ martens. Austenitic Duplex GG/ GTS GGG Titanium > 850 N/mm2 Alu < 8% Si Alu > 8% Si Copper/ copper-alloy Graphite GFK/CFK/ Duropl. < 55 HRC < 60 HRC > 60 HRC VC [m/min] 10 8 6 12 10 8 – 23 6 35 – – – – – – 1785 Thread x gradient mm Total length mm Shank ∅ mm Square shank mm Core hole ∅ mm 1785 Order No. € M6 x 0.75 80 4.5 3.4 5.65 65.40 …0001 M8 x 0.75 80 6 4.9 7.65 65.40 …0003 M8 x 1 90 6 4.9 7.55 68.50 …0005 M10 x 1 90 7 5.5 9.55 70.50 …0007 M10 x 1.25 100 7 5.5 9.4 83.00 …0009 M12 x 1 100 9 7 11.55 86.30 …0011 M12 x 1.25 100 9 7 11.4 88.10 …0013 M12 x 1.5 100 9 7 11.3 88.50 …0015 M16 x 1.5 100 12 9 15.3 113.00 …0017 M18 x 1.5 110 14 11 17.3 134.00 …0019 M20 x 1.5 125 16 12 19.3 152.50 …0021 ​ (W170) TiN Machine tap MF HSS-E DIN 374 N 6HX 60° 2–3 C ≤ 3xd TiN Hand taps and machine taps 1.5

RkJQdWJsaXNoZXIy NTg4MTI=