FORMAT_EN_2023-25_WCT_Light

Additional freight charges may apply for articles over 110 cm. Articles marked with ◊ are not stock items, they are procured at short notice. 1/235 Design: M3–M10 DIN 371 with reinforced shank. M12–M20 DIN 376 with overflow shank. Application: For regular metric threads according to DIN 13. Note: HSS-E PM tap with oil grooves and SUPRA hard coating. A polygon geometry and an optimised edge rounding process contribute to a high level of efficiency. Tolerance zone 6HX: Addition "X" indicates a special tolerance range for thread formers, as the deformed material tends to spring back. Use STEEL INOX CAST SPEC. ALLOY NON-FERROUS METAILS HARDENED STEEL Order No. < 700 N/mm2 < 1000 N/mm2 < 1400 N/mm2 ferrite/ martens. Austenitic Duplex GG/ GTS GGG Titanium > 850 N/mm2 Alu < 8% Si Alu > 8% Si Copper/ copper-alloy Graphite GFK/CFK/ Duropl. < 55 HRC < 60 HRC > 60 HRC VC [m/min] 20 18 – 7 6 – – – – – – – – – – – 1588 Thread Gradient mm Total length mm Shank ∅ mm Square shank mm Core hole ∅ mm 1588 Order No. € M3 0.5 56 3.5 2.7 2.8 35.80 …0030 M4 0.7 63 4.5 3.4 3.7 35.80 …0040 M5 0.8 70 6 4.9 4.65 37.80 …0050 M6 1 80 6 4.9 5.55 37.80 …0060 M8 1.25 90 8 6.2 7.4 49.30 …0080 M10 1.5 100 10 8 9.25 59.40 …0100 M12 1.75 110 9 7 11.2 80.20 …0120 M16 2 110 12 9 15.1 126.50 …0160 M20 2.5 125 16 12 18.9 164.00 …0200 ​ (W170) SUPRA Machine tap, UNI M HSS-E PM DIN 371 DIN 376 6HX UNI 60° 2–3 C 2xd SUPRA Design: M3–M10 DIN 371 with reinforced shank. M12–M20 DIN 376 with overflow shank. Application: For regular metric threads according to DIN 13. Note: HSS-E PM tap with ioil grooves and CUPRIC PVD hard coating. A polygon geometry and an optimised edge rounding process contribute to a high level of efficiency. Tolerance zone 6HX: Addition "X" indicates a special tolerance range for thread formers, as the deformed material tends to spring back. Use STEEL INOX CAST SPEC. ALLOY NON-FERROUS METAILS HARDENED STEEL Order No. < 700 N/mm2 < 1000 N/mm2 < 1400 N/mm2 ferrite/ martens. Austenitic Duplex GG/ GTS GGG Titanium > 850 N/mm2 Alu < 8% Si Alu > 8% Si Copper/ copper-alloy Graphite GFK/CFK/ Duropl. < 55 HRC < 60 HRC > 60 HRC VC [m/min] 20 18 – – – – – – – – – 15 – – – – 1589 Thread Gradient mm Total length mm Shank ∅ mm Square shank mm Core hole ∅ mm 1589 Order No. € M3 0.5 56 3.5 2.7 2.8 26.50 …0030 M4 0.7 63 4.5 3.4 3.7 26.50 …0040 M5 0.8 70 6 4.9 4.65 28.00 …0050 M6 1 80 6 4.9 5.55 28.00 …0060 M8 1.25 90 8 6.2 7.4 32.90 …0080 M10 1.5 100 10 8 9.25 42.30 …0100 M12 1.75 110 9 7 11.2 50.80 …0120 M16 2 110 12 9 15 83.60 …0160 M20 2.5 140 16 12 18.9 118.50 …0200 ​ (W170) CUPRIC Machine tap M HSS-E DIN 371 DIN 376 6HX N 60° 2–3 C 2xd CUPRIC Hand taps and machine taps 1.5

RkJQdWJsaXNoZXIy NTg4MTI=