Additional freight charges may apply for articles over 110 cm. Articles marked with ◊ are not stock items, they are procured at short notice. 1/237 Design: The milling principle results in an exact thread depth, a very high surface quality in the thread, process-reliable machining of difficult to cut materials and thread production very close down to the base. Without countersink bevel. Application: For regular metric threads (both right and left thread) according to ISO DIN 13 for through holes and blind holes. Note: Solid carbide thread mill for additional thread types (UNC, UNF, pipe thread etc.) on request. You will find further information in the technical appendix. Use STEEL INOX CAST SPEC. ALLOY NON-FERROUS METAILS HARDENED STEEL Order No. < 700 N/mm2 < 1000 N/mm2 < 1400 N/mm2 ferrite/ martens. Austenitic Duplex GG/ GTS GGG Titanium > 850 N/mm2 Alu < 8% Si Alu > 8% Si Copper/ copper-alloy Graphite GFK/CFK/ Duropl. < 55 HRC < 60 HRC > 60 HRC VC [m/min] 80 64 51 60 48 38 100 90 50 200 150 – – – – – 1881 Thread Gradient mm Cutting edge length mm Total length l1 mm Shank ∅ d2 mm Number of slots 1881 Order No. € M6 1 13.5 54 6 3 C◊ …0006 M8 1.25 18.1 54 6 3 C◊ …0008 M10 1.5 21.7 64 8 4 C◊ …0010 M12 1.75 25.4 74 10 4 C◊ …0012 M14 2 31 74 10 4 C◊ …0014 M16 2 35 80 12 4 C◊ …0016 (W175) TiCN Thread mill, TM SP, for internal thread M Solid carbide DIN 6535-HA 60° 27° 2xd TiCN Design: The milling principle results in an exact thread depth, a very high surface quality in the thread, process-reliable machining of difficult to cut materials and thread production very close down to the base. Larger Ø ranges can also be processed under consideration of the thread gradient. With neck groove, can be used for different thread sizes with the same pitch. Application: For regular metric threads (both right and left thread) according to ISO DIN 13 for through holes and blind holes. Note: Solid carbide thread mill for additional thread types (UNC, UNF, pipe thread etc.) on request. You will find further information in the technical appendix. Use STEEL INOX CAST SPEC. ALLOY NON-FERROUS METAILS HARDENED STEEL Order No. < 700 N/mm2 < 1000 N/mm2 < 1400 N/mm2 ferrite/ martens. Austenitic Duplex GG/ GTS GGG Titanium > 850 N/mm2 Alu < 8% Si Alu > 8% Si Copper/ copper-alloy Graphite GFK/CFK/ Duropl. < 55 HRC < 60 HRC > 60 HRC VC [m/min] 80 64 51 60 48 38 100 90 50 200 150 – – 70 50 – 1884 ∅ d1 mm Gradient mm Cutting length l2 mm d? for thread -Ø mm Effective length l3 mm Total length l1 mm Shank ∅ d2 mm Number of slots 1884 Order No. € 10 1 16 14 25 70 10 4 C◊ …0010 12 1 20 18 31 80 12 4 C◊ …0012 12 1.5 20 18 31 80 12 4 C◊ …0013 16 1.5 25 24 40 90 16 5 C◊ …0016 16 2 25 24 40 90 16 5 C◊ …0017 20 1.5 33 30 50 105 20 5 C◊ …0020 20 2 33 30 50 105 20 5 C◊ …0021 20 3 33 30 50 105 20 5 C◊ …0023 (W175) TiCN Thread mill, GFM, for internal thread M Solid carbide DIN 6535-HA 60° 15° 2xd TiCN l 1 d2 d1 l 2 l 2 l 3 d2 d1 l 1 Hand taps and machine taps 1.5
RkJQdWJsaXNoZXIy NTg4MTI=