FORMAT_EN_2023-25_WCT_Light

Additional freight charges may apply for articles over 110 cm. Articles marked with ◊ are not stock items, they are procured at short notice. 1/165 Design: Axial and radial relief ground and CBN deep-ground. With straight flute length and flutes ground from solid. Also provided with cutting and clearance angles for the most common materials. Application: For universal chatter and burr-free drilling, countersinking and deburring work for countersunk screws DIN 963, DIN 964, DIN 965, DIN 966 and DIN 7991 in one step. Please note the large countersink range! The excellent cutting properties and easy machining process result from the cone-shaped relief grinding on the coat and angle of rake. The countersink achieves the best results with the strongest feed and lowest cutting speed. Note: Sufficient supply of coolant is essential for uncoated versions. Same performance and quality features as Order No. 1430 or 1433, but with Morse taper shaft. Use STEEL INOX CAST SPEC. ALLOY NON-FERROUS METAILS HARDENED STEEL Order No. < 700 N/mm2 < 1000 N/mm2 < 1400 N/mm2 ferrite/ martens. Austenitic Duplex GG/ GTS GGG Titanium > 850 N/mm2 Alu < 8% Si Alu > 8% Si Copper/ copper-alloy Graphite GFK/CFK/ Duropl. < 55 HRC < 60 HRC > 60 HRC VC [m/min] C U – – – – – – – – – – – – – – 1450 U C – U – – – – – C C U – – – – 1453 Nominal-∅ mm Smallest ∅ mm Total length mm Shank MK 1450 1453 Order No. € € 15 3.2 85 1 42.20 – …1500 16.5 3.2 85 1 41.40 52.80 …1650 20.5 3.5 100 2 47.80 61.00 …2050 ​ (W134) (W134) Nominal-∅ mm Smallest ∅ mm Total length mm Shank MK 1450 1453 Order No. € € 23 3.8 106 2 49.00 – …2300 25 3.8 106 2 49.00 58.10 …2500 26 3.8 106 2 55.50 – …2600 ​ (W134) (W134) bright TiN bright TiN Countersink and deburring countersink, 90°, with Morse taper shank HSS DIN 335-D 3 90° 1453 TiN 1450 bright Continued on next page Design: HSS shank with carbide head, countersink angle 90°. Axial and relief ground and CBN deep-ground. With straight, u-shaped flute length and flutes ground from solid. Application: For tough materials such as Hardox 400/500, steels up to 60 HRC. The excellent cutting properties and easy machining process result from the cone-shaped relief grinding on the coat and angle of rake. The countersink achieves the best results with the strongest feed and lowest cutting speed. Note: Sufficient coolant supply is essential. Use STEEL INOX CAST SPEC. ALLOY NON-FERROUS METAILS HARDENED STEEL Order No. < 700 N/mm2 < 1000 N/mm2 < 1400 N/mm2 ferrite/ martens. Austenitic Duplex GG/ GTS GGG Titanium > 850 N/mm2 Alu < 8% Si Alu > 8% Si Copper/ copper-alloy Graphite GFK/CFK/ Duropl. < 55 HRC < 60 HRC > 60 HRC VC [m/min] 30 20 15 15 15 15 15 15 – 25 25 – – – – – 1447 Nominal-∅ mm Smallest ∅ mm Total length mm Shank ∅ mm 1447 Order No. € 6.3 1.5 45 5 84.30 …0630 8.3 2 50 6 85.50 …0830 10.4 2.5 50 6 87.50 …1040 12.4 2.8 56 8 96.60 …1240 ​ (W136) Nominal-∅ mm Smallest ∅ mm Total length mm Shank ∅ mm 1447 Order No. € 16.5 3.2 60 10 107.00 …1650 20.5 3.5 63 10 148.00 …2050 25 3.8 67 10 207.50 …2500 31 4.2 71 12 287.00 …3100 ​ (W136) bright bright Countersink and deburring countersink, 90° With morse taper shank available on request. Carbide DIN 335-C 3 90° bright Note: Set consisting of Order No. 1447. Set content mm 1447 Order No. € 6.3; 8.3; 10.4; 12.4; 16.5; 20.5 550.00 …0005 6.3; 10.4; 16.5; 20.5; 25 689.50 …0010 ​ (W136) bright Countersink and deburring countersink set, 90° bright Countersinks 1.4

RkJQdWJsaXNoZXIy NTg4MTI=