All prices quoted are non-binding recommended prices. 1/164 Set content mm 1448 Order No. € 6.3; 8.3; 10.4; 12.4; 16.5; 20.5 166.00 …0005 6.3; 10.4; 16.5; 20.5; 25 213.00 …0010 (W134) bright Countersink and deburring countersink set, 90° bright Design: With radial taper-ground, with straight flutes and tapping spaces ground from full pieces. Application: Specially designed for the highest demands in INOX steel, stainless steel and Hardox 400 as well as for all ferrous and non-ferrous metals, hard and soft plastics. For universal chatter and burr-free drilling, countersinking and deburring work for countersunk screws DIN 963, DIN 964, DIN 965, DIN 966 and DIN 7991 in one step. Please note the large countersink range! The excellent cutting properties and easy machining process result from the cone-shaped relief grinding on the coat and angle of rake. The countersink achieves the best results with the strongest feed and lowest cutting speed. Use STEEL INOX CAST SPEC. ALLOY NON-FERROUS METAILS HARDENED STEEL Order No. < 700 N/mm2 < 1000 N/mm2 < 1400 N/mm2 ferrite/ martens. Austenitic Duplex GG/ GTS GGG Titanium > 850 N/mm2 Alu < 8% Si Alu > 8% Si Copper/ copper-alloy Graphite GFK/CFK/ Duropl. < 55 HRC < 60 HRC > 60 HRC VC [m/min] 60 45 8 16 16 16 25 25 16 75 45 75 35 10 5 – 1441 Nominal-∅ mm Smallest ∅ mm Total length mm 1441 Order No. € 6.3 1.5 45 84.40 …0630 8.3 2 50 92.60 …0830 10.4 2.5 50 102.00 …1040 12.4 2.8 56 108.00 …1240 (W131) Nominal-∅ mm Smallest ∅ mm Total length mm 1441 Order No. € 16.5 3.2 60 142.00 …1650 20.5 3.5 63 177.50 …2050 25 3.8 67 200.00 …2500 31 4.2 71 315.00 …3100 (W131) DUO+ DUO+ Countersink and deburring countersink, 90°, with uneven pitch, with cylindrical shank Solid carbide DIN 335-C 3 90° DUO+ Design: With radial taper-ground, with straight flutes and tapping spaces ground from full pieces. Application: The strong imbalance allows a particularly smooth run when sinking, the surface is thereby cleaner and reduces the cutting load to a minimum. Use STEEL INOX CAST SPEC. ALLOY NON-FERROUS METAILS HARDENED STEEL Order No. < 700 N/mm2 < 1000 N/mm2 < 1400 N/mm2 ferrite/ martens. Austenitic Duplex GG/ GTS GGG Titanium > 850 N/mm2 Alu < 8% Si Alu > 8% Si Copper/ copper-alloy Graphite GFK/CFK/ Duropl. < 55 HRC < 60 HRC > 60 HRC VC [m/min] 60 50 40 25 30 25 50 45 15 80 60 70 – 12 8 – 1449 Nominal-∅ mm Smallest ∅ mm Total length mm 1449 Order No. € 6.3 1.5 45 122.00 …0630 8.3 2 50 132.00 …0830 10.4 2.5 50 137.50 …1040 12.4 2.8 56 144.00 …1240 (W141) Nominal-∅ mm Smallest ∅ mm Total length mm 1449 Order No. € 16.5 3.2 60 177.00 …1650 20.5 3.5 63 202.50 …2050 25 3.8 67 233.50 …2500 31 4.2 71 277.00 …3100 (W141) ZrN ZrN Countersink and deburring countersink, 90°, with uneven pitch, with cylindrical shank Solid carbide DIN 335-C 3 90° ZrN Countersinks 1.4
RkJQdWJsaXNoZXIy NTg4MTI=