FORMAT_EN_2023-25_WCT_Light

Additional freight charges may apply for articles over 110 cm. Articles marked with ◊ are not stock items, they are procured at short notice. 1/163 Set content mm 1445 1454 1446 1455 Order No. € € € € 6.3; 8.3; 10.4; 12.4; 16.5; 20.5 307.00 – 354.50 451.00 …0005 6.3; 8.3; 10.4; 12.4; 16.5; 20.5 – 352.00 – – …1899 ​ (W134) (W134) (W134) (W134) bright bright bright bright Countersink and deburring countersink, 90°, long, and extra-long with cylindrical shank 1445 bright Note: Set consisting of Order No. 1445. 1454 bright Note: Set consisting of Order No. 1454. 1446 bright Note: Set consisting of Order No. 1446. 1455 bright Note: Set consisting of Order No. 1446. 1455, extra long bright 1446, extra long bright 1454, long bright 1445, long bright Design: Axial and radial relief ground and CBN deep-ground. With straight, u-shaped flute length and flutes ground from solid. Also provided with cutting and clearance angles for the most common materials. Application: Specially designed for the highest demands in INOX steel, stainless steel and Hardox 400. For universal chatter and burr-free drilling, countersinking and deburring work for countersunk screws DIN 963, DIN 964, DIN 965, DIN 966 and DIN 7991 in one step. Please note the large countersink range! The excellent cutting properties and easy machining process result from the cone-shaped relief grinding on the coat and angle of rake. The countersink achieves the best results with the strongest feed and lowest cutting speed. Note: Sufficient coolant supply is essential. HSS-E PM has, in comparison to conventional HSS steels, a consistent, fine grained material structure. This means they have good hot hardness, pressure resistance and resistance to wear. Use STEEL INOX CAST SPEC. ALLOY NON-FERROUS METAILS HARDENED STEEL Order No. < 700 N/mm2 < 1000 N/mm2 < 1400 N/mm2 ferrite/ martens. Austenitic Duplex GG/ GTS GGG Titanium > 850 N/mm2 Alu < 8% Si Alu > 8% Si Copper/ copper-alloy Graphite GFK/CFK/ Duropl. < 55 HRC < 60 HRC > 60 HRC VC [m/min] 20 10 5 5 5 5 8 8 10 15 15 – – – – – 1448 Nominal-∅ mm Smallest ∅ mm Total length mm Shank ∅ mm 1448 Order No. € 6.3 1.5 45 5 18.25 …0630 8.3 2 50 6 20.80 …0830 10.4 2.5 50 6 24.00 …1040 12.4 2.8 56 8 31.00 …1240 16.5 3.2 60 10 40.60 …1650 ​ (W134) Nominal-∅ mm Smallest ∅ mm Total length mm Shank ∅ mm 1448 Order No. € 20.5 3.5 63 10 55.10 …2050 25 3.8 67 10 77.40 …2500 31 4.2 71 12 120.50 …3100 40 5 80 15 184.00 …4000 ​ (W134) bright bright Countersink and deburring countersink, 90° HSS-E PM DIN 335-C 3 90° bright Countersinks 1.4

RkJQdWJsaXNoZXIy NTg4MTI=