FORMAT_EN_2023-25_WCT_Light

All prices quoted are non-binding recommended prices. 1/162 Set content mm 1451 Order No. € 6.3; 8.3; 10.4; 12.4; 16.5; 20.5 373.50 …1899 ​ (W130) DUO+ Countersink and deburring countersink set, with uneven pitch, long, 90°, with cylindrical shank HSS-E DIN 335-C 3 90° DUO+ Design: Axial and radial relief ground and CBN deep-ground. Also provided with cutting and clearance angles for the most common materials. Application: For universal chatter and burr-free drilling, countersinking and deburring work for countersunk screws DIN 963, DIN 964, DIN 965, DIN 966 and DIN 7991 in one step. Please note the large countersink range! The excellent cutting properties and easy machining process result from the cone-shaped relief grinding on the coat and angle of rake. The countersink achieves the best results with the strongest feed and lowest cutting speed. Note: Sufficient coolant supply is essential. Use STEEL INOX CAST SPEC. ALLOY NON-FERROUS METAILS HARDENED STEEL Order No. < 700 N/mm2 < 1000 N/mm2 < 1400 N/mm2 ferrite/ martens. Austenitic Duplex GG/ GTS GGG Titanium > 850 N/mm2 Alu < 8% Si Alu > 8% Si Copper/ copper-alloy Graphite GFK/CFK/ Duropl. < 55 HRC < 60 HRC > 60 HRC VC [m/min] 20 – – – – – – – – 15 15 – – – – – 1445 20 10 – 5 5 5 – – – 15 15 – – – – – 1454 20 – – – – – – – – 15 15 – – – – – 1446 20 10 – 5 5 5 – – – 15 15 – – – – – 1455 Nominal-∅ mm Length mm Smallest ∅ mm Shank ∅ mm 1445 1454 1446 1455 Order No. € € € € 1445 1454 1446 1455 6.3 85 85 154 154 1.5 5 32.90 42.60 41.20 53.60 …0630 8.3 85 85 155 155 2 6 34.60 45.80 42.80 54.80 …0830 10.4 88 88 157 157 2.5 6 37.90 49.90 47.70 62.00 …1040 12.4 108 108 158 158 2.8 8 39.50 53.20 54.60 72.30 …1240 16.5 112 112 161 161 3.2 10 49.40 63.50 64.20 85.60 …1650 20.5 115 115 164 164 3.5 10 69.20 90.10 88.90 117.50 …2050 25 118 118 165 165 3.8 10 67.60 87.50 82.70 110.50 …2500 31 120 120 169 169 4.2 12 76.40 100.50 95.40 125.50 …3100 40 124 124 169 169 4.5 15 98.40 132.50 119.00 156.50 …4000 ​ (W134) (W134) (W134) (W134) bright bright bright bright Countersink and deburring countersink, 90°, long and extra-long, with cylindrical shank DIN 335-C 3 90° 1445 bright HSS long design. 1454 bright HSS-E, long design. 1446 bright HSS, extra-long design. 1455 bright HSS-E, extra-long design. 1455, extra long bright HSS-E 1446, extra long bright HSS 1454, long bright HSS-E 1445, long bright HSS Countersinks 1.4

RkJQdWJsaXNoZXIy NTg4MTI=