All prices quoted are non-binding recommended prices. 1/166 Design: Axial and radial taper-ground. With straight, u-shaped flute length and flutes ground from solid. Also provided with cutting and clearance angles for the most common materials. Application: For universal chatter and burr-free drilling, countersinking and deburring work for countersunk screws DIN 963, DIN 964, DIN 965, DIN 966 and DIN 7991 in one step. Please note the large countersink range! The excellent cutting properties and easy machining process result from the cone-shaped relief grinding on the coat and angle of rake. The countersink achieves the best results with the strongest feed and lowest cutting speed. Note: Sufficient supply of coolant is essential for uncoated versions. Use STEEL INOX CAST SPEC. ALLOY NON-FERROUS METAILS HARDENED STEEL Order No. < 700 N/mm2 < 1000 N/mm2 < 1400 N/mm2 ferrite/ martens. Austenitic Duplex GG/ GTS GGG Titanium > 850 N/mm2 Alu < 8% Si Alu > 8% Si Copper/ copper-alloy Graphite GFK/CFK/ Duropl. < 55 HRC < 60 HRC > 60 HRC VC [m/min] C U – – – – – – – – – – – – – – 1456 U C – U – – – – – C C U – – – – 1459 Nominal-∅ mm Smallest ∅ mm Total length mm Shank ∅ mm 1456 1459 Order No. € € 6.3 1.7 45 5 9.10 15.00 …0630 8 2.1 50 6 9.50 15.70 …0800 10 2.6 53 6 11.65 19.55 …1000 12.5 3.3 56 8 12.25 21.10 …1250 16 4.1 63 10 15.25 25.80 …1600 (W134) (W134) Nominal-∅ mm Smallest ∅ mm Total length mm Shank ∅ mm 1456 1459 Order No. € € 20 5.1 67 10 21.30 35.20 …2000 25 6.4 71 10 29.40 46.80 …2500 31.5 10.01 76 12 49.10 73.10 …3150 40 10.01 91 15 80.50 114.50 …4000 (W134) (W134) bright TiN bright TiN Countersink and deburring countersink, 60°, with cylindrical shank HSS DIN 334-C 3 60° 1459 TiN 1456 bright Set content mm 1456 Order No. € 6.3; 8.3; 10.4; 12.4; 16.5; 20.5 91.00 …1899 6.3; 10.4; 16.5; 20.5; 25 115.50 …1895 (W134) bright Countersink and deburring countersink set, 60°, with cylindrical shank bright Nominal-∅ mm Smallest ∅ mm Total length mm Shank MK 1450 1453 Order No. € € 30 4.2 112 2 55.50 70.70 …3000 31 4.2 112 2 57.00 76.10 …3100 34 4.5 118 2 57.00 76.10 …3400 37 4.8 118 2 65.80 109.00 …3700 40 10 140 3 83.20 109.00 …4000 (W134) (W134) Nominal-∅ mm Smallest ∅ mm Total length mm Shank MK 1450 1453 Order No. € € 45 12 145 3 104.50 – …4500 50 14 150 3 103.50 163.50 …5000 63 16 180 4 169.50 263.00 …6300 80 22 190 4 195.00 302.50 …8000 (W134) (W134) bright TiN bright TiN Continued Countersink and deburring countersink, 90°, with Morse taper shank Countersinks 1.4
RkJQdWJsaXNoZXIy NTg4MTI=