Additional freight charges may apply for articles over 110 cm. Articles marked with ◊ are not stock items, they are procured at short notice. 6/341 Design: Supplied in L-Boxx, with operating instructions always visible on the lid. Application: For recessed, external and bearing pulling of Ø 8-48 mm. Design Model Set content 6896 Order No. € 21-pc 27-A 1 two-armed extractor 43-01 1 extractor two-armed with lateral clamping device 204-01 1 ball bearing puller 69-A1, suitable for bearing: 6004; 6005; 6006; 6201; 6202; 6203 1 ball bearing puller 69-A2, suitable for bearing: 6008; 6009; 6204; 6205; 6300; 6301; 6302 1 ball bearing puller 69-A3, suitable for bearing: 6010; 6206; 6303; 6304 1 recessed extractor 21-01-E for bearings ∅ 9–12 mm 1 recessed extractor 21-1-E for bearings ∅ 12–16 mm 1 recessed extractor 21-2-E for bearings ∅ 14–19 mm 1 recessed extractor 21-3-E for bearings ∅ 18–23 mm 1 recessed extractor 21-4-E for bearings ∅ 24–34 mm 1 recessed extractor 21-5-E for bearings ∅ 34–48 mm 10 slide hammers with adapter 22-01-G27-A: M3; M4; M5; M6; M8; M10; M12 and galvanised: M10; M12; 15-16G 929.50 …0005 (W562) Universal extractor set Design: Self-locking retaining pins ensure a quick and easy replacement of the jaws, without having to relieve the compression spring. Automatic self-tensioning and self-centring of the extractor hooks. Fixation of the extractor hook position is done by the easily accessible locking lever. No unintentional release of the extractor from the bearing thanks to lock lever and self-clamping. The innovative spring technology allows a compact and maintenance-free design. Supplied in L-Boxx, with operating instructions always visible on the lid. Application: As an external or recessed extractor, with 2 o 3 extraction hooks, for use with or without sliding hammer. Design Model Set content 6919 Order No. € 15-pc K-4861-22 1 traverse 1 spindle 3 hooks (outside) 3 hooks (inside) 3 pins 1 connection nut 1 sliding hammer fixture 1 3-component sliding hammer 1 thread adapter 415.00 …0160 (W562) Three-armed combination extractor set with lock mechanism Design: Sturdy counter support with T-handle and single extraction hook. Application: For use with an recessed extractor (Order No. 6922). For connecting to the recessed extractor, the spindle of the support brace is screwed into the clamping nut of the recessed extractor. Model for recessed extractor model 6923 Order No. € 22-1 21-0 to 21-5 62.40 …0001 22-2 21-3 to 21-8 85.10 …0002 22-3 21-6 to 21-9 171.00 …0003 (W562) Counter part for recessed extractor 6923 0001 Supplied with screwed-in reducer For recessed extractors 21-0 and 21-02, with reducer. For recessed extractors 21-1 and 21-5, without reducer. 6923 0002 Supplied with screwed-in reducer For recessed extractors 21-3 and 21-5, with reducer. For recessed extractors 21-6 and 21-8, without reducer. 6923 0003 Supplied with connection nut and screwed-in reducer. For recessed extractor 21-6 and 21-8, with reducer via connecting nut. For recessed extractor 21-9, without reducer via connecting nut. Extractors 6
RkJQdWJsaXNoZXIy NTg4MTI=