All prices quoted are non-binding recommended prices. 6/342 Design: Extraction hook quenched and tempered. The special traverse form ensures self-tension of the extraction hooks. Special hooks for precise installation in bearing tracks, for optimum grip and higher expansion forces. Both hook versions are colour coded. Easy suspension of the extractor hooks with 90° rotation in the traverse. Lateral hook surfaces serve for optimum alignment with the traverse. Application: Grooved ball bearings that sit on a shaft and in a housing can be easily extracted. Contact-free removal is possible in combination with a slide hammer. Design Model Set content for ball bearings 6339 Order No. € 18-pc K-70-A 1 traverse 1 spindle 6 hooks 7 supporting rings 3 three-armed counter-pressure pieces (for hollow shafts) 6000–6006; 6200–6205; 6300–6304 539.50 …1005 21-pc K-70-B 1 traverse 1 spindle 8 hooks 7 supporting rings 4 four-armed counter-pressure pieces 6007–6020; 6206–6212; 6305–6311; 6403–6408 775.50 …1010 38-pc K-70-C 2 traverses 2 spindles 14 hooks 13 supporting rings 3 three-armed counter-pressure pieces (for hollow shafts) 4 four-armed counter-pressure pieces 6000–6020; 6200–6212; 6300–6311; 6403–6408 1229.00 …1015 (W562) Extraction set PULLPO® Design Model Set content 6926 Order No. € 11-pc in L-Boxx 24-A 6 recessed extractors (12–46 mm) 21-1 to 21-6 2 counter supports 22-1; 22-2 1 removal chuck for groove ball bearing inner rings 23 1 double-armed battery clamp remover 43-1 1 two-armed extractor 20-1 945.00 …0046 14-pc in L-Boxx 24-B 8 recessed extractors (12–70 mm) 21-1 to 21-8 2 counter supports 22-1; 22-2 1 removal chuck for groove ball bearing inner rings 23 1 double-armed battery clamp remover 43-1 2 two-armed extractors 20-1; 20-2 1382.00 …0070 15-pc in metal case. 24-C 7 recessed extractors (12–58 mm) 21-1 to 21-6 1 Internal extractor (65–110 mm) 21-89 3 counter supports 21-1; 22-2; 22-4 1 removal chuck for groove ball bearing inner rings 23 1 double-armed battery clamp remover 43-1 2 two-armed extractors 20-1; 20-2 1803.00 …0110 (W562) Design: Supplied in L-Boxx or metal case, with operating instructions always visible on the lid. Application: For extracting ball bearings, bearings, gears, shoulder bearing inner rings, deep groove ball bearings as well as extracting tight-fitting ball bearings, bearing outer rings and sleeves. Ball bearing extractor and extractor set Extractors 6
RkJQdWJsaXNoZXIy NTg4MTI=