All prices quoted are non-binding recommended prices. 6/340 Design: Basic equipment with two and three arm universal extractors and additional, long spindles. Supplied in L-Boxx, with operating instructions always visible on the lid. Design Model Set content 6919 Order No. € 13-pc K 2030-10-S 1 crossbeam 2-armed, span 120 mm 1 crossbeam 3-armed, span 130 mm 1 spindle, length 160 mm, SW 13 mm 1 spindle, length 250 mm, SW 17 mm 3 puller hooks, clamping depth 100 mm 3 puller hooks, clamping depth 200 mm 3 puller hooks, clamping depth 250 mm 593.00 …0011 (W562) Universal two-and three-arm extractor set Design: With two-piece clamping jaws and expanding pieces. Application: For extracting ball bearings, bearing outer rings and bushings. Also bearing located very close to the rear wall are captured and quickly pulled out due to the excellent clamping effect. For use with counter support for recessed extractor model (6923). Size for drilling mm for counter support model No. Length mm 6922 Order No. € 21-01 8– 12 22-1 73 61.80 …0012 21-02 10– 14 22-1 73 61.80 …0014 21-1 12– 16 22-1 72 61.80 …0016 21-2 14– 19 22-1 72 61.80 …0019 21-3 18– 23 22-1; 22-2 89 61.80 …0023 21-4 20– 30 22-1; 22-2 92 61.80 …0030 21-5 28– 40 22-1; 22-2 101 69.30 …0040 21-6 36– 46 22-2; 22-3 113 77.50 …0046 21-7 45– 58 22-2; 22-3 135 104.00 …0058 21-8 56– 70 22-2; 22-3 133 131.00 …0070 21-9 70–100 22-2; 22-3 166 207.50 …0100 (W562) Recessed extractor 6922 Design: Space-saving, stable model, with ergonomic shaped handles. Application: For use with an recessed extractor (6922). For quick removal of ball bearings. After setting the recessed extractor slide hammer bar screw with a wedge spindle and slide hammer. Model for recessed extractor model Weight kg Length mm 6924 Order No. € 22-0 21-0 to 21-2 0.5 150 62.40 …0000 22-0-1 21-3 to 21-8 1.7 230 171.00 …0004 (W562) Slide hammer device 6924 0000 6924 0004 Design: Supplied in plastic case or in i-Boxx, with foam insert. Design Model Set content for recessed extractor model 6925 Order No. € 10-pc in plastic case KS-22-01 1 slide hammer 6 thread adapters M3; M4; M5; M6; M8; M10 3 galvanised adapters M10; M12; 15-16G 21-0 to 21-8 133.00 …0000 18-pc in i-Boxx 28-A 1 slide hammer 10 threaded adapters M3; M4; M5; M6; M8; M10; M12; M14; M16; M18 5 recessed extractor 21-00; 21-01 (6922 0012); 21-02 (6922 0014); 21-1 (6922 0016); 21-2 (6922 0019) 2 galvanised adapters M10; M12 21-00 to 21-2 394.50 …0005 (W562) Slide hammer set 6925 0000 6925 0005 Extractors 6
RkJQdWJsaXNoZXIy NTg4MTI=