Additional freight charges may apply for articles over 110 cm. Articles marked with ◊ are not stock items, they are procured at short notice. 1/79 Design: CBN deep ground, straight fluted. Chuck slippage is avoided by the 3-surface shank. With laser print of hole Ø and speed. The hole Ø can still be read with the tool rotating. Application: For burr-free drilling and reaming of sheets, pipes and profiles. Works without burrs and chatter marks and can be used in hand drills and box column drills. No punch marking required. For steel sheet metal 0.1–2.0 mm Nirosta sheet (V2A) 0.1–1.0 mm Plastic up to 10.0 mm NE metals 0.1–5.0 mm Note: To increase the service life, we recommend the use of drilling paste. Order No.: 1312 0005 Ç 1/84. Use STEEL INOX CAST SPEC. ALLOY NON-FERROUS METAILS HARDENED STEEL Order No. < 700 N/mm2 < 1000 N/mm2 < 1400 N/mm2 ferrite/ martens. Austenitic Duplex GG/ GTS GGG Titanium > 850 N/mm2 Alu < 8% Si Alu > 8% Si Copper/ copper-alloy Graphite GFK/CFK/ Duropl. < 55 HRC < 60 HRC > 60 HRC VC [m/min] C U – – – – – – – C C C – – – – 1300 C C – U – – – – – C C C – – – – 1303 Drilling area mm Size Total length mm Shank length mm Shank ∅ mm 1300 1303 Order No. € € 3–14 1 58 20 6 9.40 16.70 …0010 4–31 7 103 25 9 36.90 54.50 …0070 4–20 2 71 22 8 15.60 23.50 …0020 16–30.5 3 76 22 9 27.20 49.00 …0030 24–40 4 89 30 10 51.00 104.00 …0040 36–50 5 97 30 12 93.00 149.00 …0050 40–61 6 103 30 12 158.00 230.00 …0060 (W124) (W124) steam TiN Precision taper sheet and tube drill (tapered drill) HSS 1303 TiN 1300 steam Set content mm 1306 1309 Order No. € € 3–14; 4–20; 16–30.5 72.00 108.00 …0100 (W124) (W124) steam TiN Precision taper sheet and tube drill set (tapered drill) 1309 TiN 1306 steam Drills HSS/HSS-E 1.1
RkJQdWJsaXNoZXIy NTg4MTI=