FORMAT_EN_2023-25_WCT_Light

All prices quoted are non-binding recommended prices. 1/78 Use STEEL INOX CAST SPEC. ALLOY NON-FERROUS METAILS HARDENED STEEL Order No. < 700 N/mm2 < 1000 N/mm2 < 1400 N/mm2 ferrite/ martens. Austenitic Duplex GG/ GTS GGG Titanium > 850 N/mm2 Alu < 8% Si Alu > 8% Si Copper/ copper-alloy Graphite GFK/CFK/ Duropl. < 55 HRC < 60 HRC > 60 HRC VC [m/min] 25 20 16 8 6 5 20 16 – 40 – 60 – – – – 1115 Use STEEL INOX CAST SPEC. ALLOY NON-FERROUS METAILS HARDENED STEEL Order No. < 700 N/mm2 < 1000 N/mm2 < 1400 N/mm2 ferrite/ martens. Austenitic Duplex GG/ GTS GGG Titanium > 850 N/mm2 Alu < 8% Si Alu > 8% Si Copper/ copper-alloy Graphite GFK/CFK/ Duropl. < 55 HRC < 60 HRC > 60 HRC VC [m/min] 25 20 16 8 6 5 20 16 – 40 – 60 – – – – 1112 Design: With precision ground point. Drilling and countersinking are produced in a single step, aligned to each other. ∅ tolerance: ∅d1 = h9 ∅d2 = h8 Note: The cutting speed is orientated towards the large diameter. Multiple-fibre stepped drill, with cylindrical shank HSS N 118° 25–30° Design: Countersink angle 90°. Application: For thread core holes according to DIN 336, part 1 and 90° free countersinking corresponding with the through-holes according to DIN EN 20273. Use STEEL INOX CAST SPEC. ALLOY NON-FERROUS METAILS HARDENED STEEL Order No. < 700 N/mm2 < 1000 N/mm2 < 1400 N/mm2 ferrite/ martens. Austenitic Duplex GG/ GTS GGG Titanium > 850 N/mm2 Alu < 8% Si Alu > 8% Si Copper/ copper-alloy Graphite GFK/CFK/ Duropl. < 55 HRC < 60 HRC > 60 HRC VC [m/min] 25 20 16 8 6 5 20 16 – 40 – 60 – – – – 1109 for thread Drill ∅ d1 x countersink ∅ d2 mm Total length l1 mm Spiral length l2 mm Drill step length l3 mm 1109 Order No. € M3 2.5 x 3.4 70 39 8.8 19.65 …0030 M4 3.3 x 4.5 80 47 11.4 21.50 …0040 M5 4.2 x 5.5 93 57 13.6 22.00 …0050 M6 5 x 6.6 101 63 16.5 29.50 …0060 M8 6.8 x 9 125 81 21 36.60 …0080 M10 8.5 x 11 142 94 25.5 45.00 …0100 M12 10.2 x 13.5 160 108 30 46.80 …0120 ​ (W104) steam Multi-chamfer stepped drill, 90°, for core holes DIN 8378 steam Design: Countersink angle 90°, fine. Application: For screw through holes according to DIN EN 20273 and 90° screw head countersinking. Form A and B according to DIN 74, part 1. For screws according to DIN 963 and DIN 964. for thread Drill ∅ d1 x countersink ∅ d2 mm Total length l1 mm Spiral length l2 mm Drill step length l3 mm 1112 Order No. € M3 3.2 x 6 93 57 9 23.30 …0030 M4 4.3 x 8 117 75 11 27.00 …0040 M5 5.3 x 10 133 87 13 34.00 …0050 M6 6.4 x 11.5 142 94 15 38.10 …0060 M8 8.4 x 15 169 114 19 63.40 …0080 M10 10.5 x 19 198 135 23 97.70 …0100 ​ (W104) steam Multi-chamfer stepped drill, 90°, for through holes DIN 8374 steam Design: Countersink angle 180°, medium. Application: For screw through holes according to DIN EN 20273 and 180° screw head countersinking. Form H, J and K according to DIN 84, DIN 912, DIN 6912, DIN 7513 and DIN 7984. for thread Drill ∅ d1 x countersink ∅ d2 mm Total length l1 mm Spiral length l2 mm Drill step length l3 mm 1115 Order No. € M3 3.4 x 6 93 57 9 23.40 …0030 M4 4.5 x 8 117 75 11 27.10 …0040 M5 5.5 x 10 133 87 13 32.90 …0050 M6 6.6 x 11 142 94 15 38.00 …0060 M8 9 x 15 169 114 19 47.70 …0080 M10 11 x 18 191 130 23 99.30 …0100 ​ (W104) steam Multi-chamfer stepped drill, 180°, for through holes DIN 8376 steam ​ ​ Drills HSS/HSS-E 1.1

RkJQdWJsaXNoZXIy NTg4MTI=