FORMAT_EN_2023-25_WCT_Light

Additional freight charges may apply for articles over 110 cm. Articles marked with ◊ are not stock items, they are procured at short notice. 5/101 Design: For use in low-impedance measurement and for measuring protective and equipotential bonding conductors. Supplied with winder and wrist strap. Measuring cable TA 5 for installation testers m Design: With automatic test run, secure measurement connection even for PV system energy supply. Measured data storage for 200 photovoltaic strings, USB interface for measured data download. Integrated real time clock to save measured data with date and time stamp. Radio link to irradiation and temperature gauge BENNING SUN 2. ISO measurement result with good/poor display, automatic display of voltage polarity with acoustic/visual warning in case of incorrect polarity, direct connection to all standard PV modules with MC4 or Sunclix plug connectors. Application: For installing and re-testing grid-connected photovoltaic systems in accordance with VDE 0126-23 (DIN EN 62446). Suitable for solar engineers (commissioning, repeat tests, trouble-shooting), photovoltaic experts as well as service, cleaning and maintenance teams. Scope of delivery: Test device, test leads, crocodile clips, MC4/Sunclix test leads, calibration certificate, case and batteries. Protective conductor resistance 0.05 Ohm–199 Ohm Insulation resistance 0.05 MOhm–199 MOhm Off-load voltage (direct current) 5 V–1000 V Short-circuit current (direct current) 0.5 A–15 A Voltage 30 V–440 V Measurement value memory 200 Batteries 6 x Mignon AA/LR6 5586 € 1550.00 (W511) Order No. …0300 PV 1-1 photovoltaic installation tester IP40 USB Design: With automatic test runs for characteristic measurement and Riso test, secure measurement connection even for PV system energy supply. USB interface for measurement value download. Integrated real time clock to save measured data with date and time stamp. Radio link to irradiation and temperature gauge Benning SUN 2. ISO measurement result with good/poor display, automatic display of voltage polarity with acoustic/visual warning in case of incorrect polarity, direct connection to all standard PV modules with MC4 or Sunclix plug connectors. Current–voltage characteristic and performance curve with display of voltage, current at maximum power point and fullness factor assessment, free app for Android (NFC) for characteristic display, STC calculation and performance comparison via integrated PV module database. Application: For the installation and repeat tests, as well as performance assessment, of photovoltaic systems hooked up to the mains according to VDE 0126-23 (DIN EN 62446) and VDE 0126-24 (DIN EN 62446). Suitable for solar engineers(commissioning, repeat tests, trouble-shooting), photovoltaic experts as well as service, cleaning and maintenance teams. Scope of delivery: Test device, test leads, crocodile clips, MC4/Sunclix test leads, calibration certificate, case, batteries, USB cable and download software on CD-ROM. Note: Benning SUN 2 irradiation and temperature measurement device see Order No. 5586 0400. Protective conductor resistance 0.05 Ohm–199 Ohm Insulation resistance 0.05 MOhm–199 MOhm (Riso)/ 0.05 MOhm–300 MOhm (2-pole) Off-load voltage 5 V–1000 V DC Short-circuit current 0.5 A–15 A DC Interface USB, wireless, NFC Measurement value memory 999 Batteries 6 x Mignon AA/LR6 5586 € 1922.00 (W511) Order No. …0600 Photovoltaic installation tester and characteristic curve measuring device PV 2 USB Length m 5586 Order No. € 40 C …9010 ​ (W511) Test and measuring devices 5

RkJQdWJsaXNoZXIy NTg4MTI=