FORMAT_EN_2023-25_WCT_Light

All prices quoted are non-binding recommended prices. 5/18 Design: C-shape, of quality steel, drop-forged and galvanised. Spindle, burnished, with trapezoidal thread and mobile pressure plate. With pushed-through T-handle. Application: Predominantly in metal and steel construction, provides extremely high clamping forces due to the minimal projection and robust design. Clamping force up to 22 kN. Clamping width mm Projection mm 5112 Order No. € 60 55 37.70 …0006 100 75 52.40 …0010 120 85 62.70 …0012 150 95 70.60 …0015 200 105 89.40 …0020 ​ (W519) C screw clamp Design: Slide rail made of burnished steel, fixed bracket and mobile bracket made of impact-resistant and unbreakable polyamide. The fixed bracket can be quickly and easily changed from clamping to strutting without the need for tools. The convertible adapter can be attached to the lower or upper part depending on the intended use. With soft protective caps and a 2-component plastic handle fitted behind the rail. Application: For slots 12 x 6.5 to 12 x 8 mm. For the secure fixing of guide rails from the brands FESTOOL®, PROTOOL®, metabo®, MAKITA®, HITACHI® etc. and for clamping in profiles. For clamping forces up to 0.75 kN. Comfortable solution for situations where you only have one hand free. Also suitable for overhead work. Clamping width mm Spreading width mm Projection mm Slide rail mm 5062 Order No. € 150 120–310 60 14 x 5 43.30 …0150 ​ (W519) Single-hand table clamp pair EZR Design: Fixed bracket with pressure plate. Slide rail, fixed bracket and pressure plate made from one piece of structurally optimised, cold-drawn profile steel; mobile bracket made of forged and galvanised, zinc-plated, heat-treated steel. Application: For grooves 12 x 8 mm. For the secure fixing of guide rails from the brands FESTOOL®, PROTOOL®, metabo®, MAKITA®, HITACHI® etc. and for clamping in profiles. Clamping width mm Projection mm Slide rail mm 5066 5068 Order No. € € 120 60 13.5 x 6.5 18.10 – …0012 160 60 13.5 x 6.5 19.60 47.30 …0016 300 60 13.5 x 6.5 22.10 – …0030 ​ (W519) (W519) All-steel table clamp 5066 Smooth-running spindle with rolled, cold-twisted and burnished trapezoidal thread, with wooden handle. Clamping force up to 1.8 kN. 5068 Lever handle for 5-times-faster creation of clamping force than conventional screw clamps. Clamping force up to 2.4 kN. 5068 5066 Design: Slide rail, fixed bracket and pressure plate made from one piece of structurally optimised, colddrawn profile steel; mobile bracket made of forged and galvanised zinc-plated heat-treatable steel; smoothrunning spindle with rolled, strain-hardened and phosphate-treated trapezoidal thread. Clamping occurs with the 2 large, tiltable super polyamide clamping surfaces, reinforced with special steel inserts. With wooden handle. Clamping width mm Projection mm Slide rail mm 5124 Order No. € 200 100 19.5 x 9.5 47.60 …0020 ​ (W519) Surface clamp Application: For flexible and gentle clamping, and for the sensitive holding of items. The 2 large clamping surfaces allow you to clamp items with both linear and angled contact surfaces and to fix mitre joints. Clamping force up to 5 kN. Clamps 5

RkJQdWJsaXNoZXIy NTg4MTI=