FORMAT_EN_2023-25_WCT_Light

Additional freight charges may apply for articles over 110 cm. Articles marked with ◊ are not stock items, they are procured at short notice. 5/17 Design: With clamping mechanism located outside the working area. Slide rail, fixed bracket and pressure plate made from one piece of structurally optimised, cold-drawn profile steel; mobile bracket made of heat-treatable steel in precision-casting process, heat-treated and galvanised zinc-plated. The smoothrunning spindle with rolled, cold-twisted and burnished trapezoidal thread is protected from spatter. Pressure plate made of high-quality and burnished cast with prism, pivots to 30°. With removable end-stop for quick resetting of the mobile bracket for strutting. With pushed-through T-handle. Application: Particularly for installation and welding works in small openings, at short protrusions and narrow spaces. Clamping force up to 7.5 kN. Clamping width mm Projection mm Slide rail mm 5119 Order No. € 300 120 28 x 11 120.00 …3000 600 120 28 x 11 136.50 …6000 ​ (W519) Steel bar clamp Design: U-shape-bent fixed bracket with pressure plate. Slide rail, fixed bracket and pressure plate made from one piece of structurally optimised, cold-drawn profile steel; mobile bracket made of forged and galvanised zinc-plated heat-treatable steel; smooth-running spindle with rolled, strain-hardened and burnished trapezoidal thread; mobile pressure plate. With pushed-through T-handle. Application: Especially for clamping forces up to 4 kN. For comprehensive clamping, e.g. to T-bearings and double T-bearings. Clamping width mm Clamping depth mm Projection mm Slide rail mm 5113 Order No. € 250 60 120 22 x 10.5 63.50 …0025 ​ (W519) All-steel U screw clamp Design: U-shape-bent fixed bracket with pressure plate. Slide rail, fixed bracket and pressure plate made from one piece of structurally optimised, cold-drawn profile steel; mobile bracket made of forged and galvanised zinc-plated heattreatable steel; smooth-running spindle with rolled, strain-hardened and phosphate-treated trapezoidal thread. Heat-resistant, high-performance pressure plate with large ball coupling, can be pivoted up to 35° and replaced, with hardened and oil-soaked sintered steel insert. With pushed-through T-handle. Application: Especially for clamping forces up to 12 kN. For comprehensive clamping, e.g. to T-bearings and double T-bearings. Fast, low-vibration clamping. Clamping width mm Clamping depth mm Projection mm Slide rail mm 5114 Order No. € 300 100 140 30 x 15 133.00 …0030 ​ (W519) High-performance U screw clamp Design: Slide bracket made of forged tempered steel for maximum safety at high loads. Tool-free removable end-stop for quick repositioning of the mobile bracket for spreading or to exchange for other slide bracket variations on a modular basis. Wear-resistant, tempered spindle. Heat resistant special pressure plate, swivelling up to 35°. For jaw span 3000 mm, optionally with hardened and oilsoaked sintered steel insert for extremely long life due to excellent sliding and fail-safe properties. Application: For clamping and spreading with high clamping forces and large jaw spans over the entire range of metal and woodworking. Clamping force up to 6.5 kN up to jaw span 2000 mm and up to 9 kN for span 3000 mm. Clamping width mm Spreading width mm Projection mm Slide rail mm 5072 Order No. € 1000 340–1250 120 27 x 13 123.50 …0100 1500 340–1750 120 27 x 13 152.00 …0150 2000 340–2250 120 27 x 13 178.50 …0200 3000 400–3340 140 30 x 15 331.00 B …0300 ​ (W519) High performance clamp Clamps 5

RkJQdWJsaXNoZXIy NTg4MTI=