FORMAT_EN_2023-25_WCT_Light

All prices quoted are non-binding recommended prices. 4/64 Design: The display is water and cooling-agent resistance, combined digit and scale display, operating and display part can be rotated by 360°, matt chrome-plated protective housing with 3 dovetail guideways, shockproof measuring unit, axles mounted in precious stones, automatic adjustment of probe direction, antimagnetic design, ball-bearing mounted double lever, overload protection by means of slip clutch. With data output RS232, USB and Digimatic. Supplied with clamping shaft, key to exchange measuring inserts and measuring insert Ø 2 mm, in case. Functions: On and automatic off switching, mm/inch switching, MIN-MAX for concentricity and evenness testing. Application: Measurement of concentricity, axial runout, parallelism and evenness deviations, centring of shafts or holes, parallel or right-angled alignment of workpieces. Note: Data cable available on request. Measurement range mm Reading mm Housing ∅ mm Measuring insert length mm 4254 Order No. € ±0.4 0.001 43 14.5 429.50 …0040 ±0.25 0.001 43 41.24 484.50 …0045 ​ (W488) Digital lever gauge IP65 Design: Rectangular holder, with mounting holes Ø 4 mm h7 and Ø 8 mm h7 as well as dovetail guideway. Dimensions mm 4256 Order No. € 6 x 12 x 80 23.10 …0001 ​ (W422) Clamping holder, for lever gauges Design: Ø 8 mm h6 with dovetail guideway. Design 4257 Order No. € rigid 13.65 …0005 swivelling 57.10 …0007 ​ (W423) Clamping shaft, for lever gauges 4257 0005 4257 0007 Design: High-contract dial, sealed with O ring, safety disk made of mineral glass for highest protection against breakage, scratching, hot chipping as well as the highest resistance solvents: Matt-chrome-plated protective housing with 3 integrated dovetail guideways, shockproof measuring unit, antimagnetic design, automatic adjustment to the probe direction, causing error-free reading, ball-bearing mounted double lever, overload protection by means of slip clutch, measuring insert with carbide ball. Supplied with key to exchange measuring inserts, measuring insert Ø 2 mm, clamping shaft (Ø 8 mm h6), in case. Application: Measurement of concentricity, axial runout, parallelism and evenness deviations, centring of shafts or holes, parallel or right-angled alignment of workpieces. Measurement range mm Reading mm Scale numbering Housing ∅ mm Probe length mm 4254 Order No. € ±0.4* 0.01 40–0– 40 27.5 13.6 108.00 …0030 ±0.4 0.01 40–0– 40 38 13.6 109.00 …0033 ±0.8 0.01 40–0– 40 38 13.6 194.50 …0035 ±0.25 0.01 25–0– 25 28 40.3 174.50 …0037 ±0.25 0.01 25–0– 25 38 40 193.50 …0039 ±0.5 0.01 50–0– 50 38 31.4 207.00 …0041 ±0.1 0.002 100–0–100 28 13.6 141.00 …0043 ±0.1 0.002 100–0–100 38 13.6 155.50 …0046 ±0.2 0.002 100–0–100 38 13.6 222.00 …0049 ±0.07 0.001 70–0– 70 38 8.3 207.00 …0052 ​ (W488) Lever gauge * DIN 2270. DIN 2270 Lever gauges 4.3

RkJQdWJsaXNoZXIy NTg4MTI=