FORMAT_EN_2023-25_WCT_Light

Additional freight charges may apply for articles over 110 cm. Articles marked with ◊ are not stock items, they are procured at short notice. 4/63 Design: Hard chrome-plated housing for protection of the dovetail guides, resistant against impacts, bearing for lever gauge shaft in precision ball bearings, movements bearing supported with rubies, automatic switching of measuring direction, housing with three milled dovetail guides for holding the clamping shaft (Ø 8 mm h6), measuring insert M1.6 with 2 mm Ø carbide-tipped, rotating outer metal ring. Supplied with key, in plastic case. Application: To check the concentricity of shafts and sleeves, for centring bore holes, alignment of surfaces and parallelism inspections. Form A = measuring insert can be pivoted at a right angle to the scale by 240°. Form B = measuring insert pivotable parallel to scale by 240°. Form C = measuring insert can be pivoted to back of scale by 240°. Measurement range mm Reading mm Scale numbering mm Housing ∅ mm Probe length mm Form 4250 4252 Order No. € € 0.8 0.01 0– 40–0 32 12.8 A 104.50 – …0008 0.5 0.01 0– 25–0 32 35.7 A – 136.00 …1033 0.2 0.002 0–100–0 32 12.8 A – 115.00 …1036 0.8 0.01 0– 40–0 40 12.8 A – 95.40 …1040 0.5 0.01 0– 25–0 40 35.7 A – 138.00 …1043 0.2 0.002 0–100–0 40 12.8 A – 115.50 …1046 2 0.02 0–100–0 40 35.7 A – 161.50 …1402 0.8 0.01 0– 40–0 32 12.8 B – 124.00 …2031 0.5 0.01 0– 25–0 32 35.7 B – 141.50 …2034 0.2 0.002 0–100–0 40 12.8 B – 143.50 …2047 0.8 0.01 0– 40–0 32 12.8 C – 128.00 …3032 0.5 0.01 0– 25–0 40 35.7 C – 153.00 …3045 0.2 0.002 0–100–0 40 12.8 C – 145.50 …3048 ​ ​ ​ ​ ​ (W422) (W423) Precision lever gauge DIN 2270 4252 Form C 4252 Form B 4252 Form A 4250 Form A Design: The measurement sensor is adjustable to the right and left by 110°, the lever movement is switchable. Support on top and bottom clamping shaft (Ø 8 mm h6). Supplied in plastic case. Measurement range mm Reading mm Scale numbering Housing ∅ mm Probe length mm 4255 Order No. € 0.8 0.01 0–40–0 28 12 111.50 …0008 ​ (W422) Lever gauge, with pivoting measurement sensor Lever gauges 4.3

RkJQdWJsaXNoZXIy NTg4MTI=