All prices quoted are non-binding recommended prices. 3/164 Design: Base body made of malleable iron; jaws of tempered steel, case-hardened. Height and stable design with a strong pull-down and resilience force. With interchangeable and reversible jaws with a fluted and a smooth side. Application: For lateral clamping of high workpieces. Note: All mounting screws should be ordered separately based on the slot width of the screws for T-slots DIN 787. Clamping jaws made of plastic available from the supplier. Slot width mm b mm b1 mm c mm e mm H mm h1 mm h2 mm h3 mm l mm l1 mm F1 kN F2 kN 3933 3402 Order No. € € 12 14 16 18 65 19 8 12 85 38 99 40179112.5 8 15 20 28 1.2 2.2 3 4.2 231.00 265.00 …0019 20 22 24 28 30 75 26 11 12 100 45 118 40 230 138.5 25 25 32 32 36 4.5 4.5 4.8 4.8 5.4 321.50 359.00 …0026 (W340) (W342) Stable clamping jaw Design: With exact prismatic guide, base body made of quenched and tempered steel, clamping jaws made of case-hardened steel. The jaws can be turned around, with a smooth side for machined workpieces and a fluted side for raw workpieces. Application: These stable jaws are suitable for lateral clamping thanks to the large clamping surface. We recommend using two tightening bolts when fixing the stable clamping jaw to the machine table. Note: All fixing bolts (2 per clamping jaw) should be ordered separately based on the slot width of the bolts for T-slots DIN 787. Slot width mm B1 mm B2 mm C mm E mm H minimum mm H maximum mm H1 mm H2 mm L1 max. mm L2 mm L4 mm A/F F1 kN F2 kN Md 3804 Order No. € 12 14 16 18 19 65 6 12 50 60 30401771132916 8 15 20 28 1.2 2.2 3 4.2 20 40 45 60 296.00 …0019 20 22 24 28 30 26 75 7.5 12 60 73 36 40 224 135 29 18 25 25 32 32 36 4.5 4.5 4.8 4.8 5.4 85 85 95 95 110 C …0026 32 36 42 38 90 10 12 75 91.5 46 40 256 152 34 21 50 7.5 160 C …0038 (W342) Stable clamping jaw, flat * Clamping forces F1 and F2 depend on the slot width Clamping elements 3.8
RkJQdWJsaXNoZXIy NTg4MTI=