FORMAT_EN_2023-25_WCT_Light

Additional freight charges may apply for articles over 110 cm. Articles marked with ◊ are not stock items, they are procured at short notice. 3/163 Design: Made of tempered ductile cast iron and steel, annealed in burnished finish. With 12 mm Ø centre hole. The correcting wedge can easily be adjusted using normal manual force under 1/3 load of load capacity (F max.). The finely machined wedge surfaces allow smooth, sensitive adjustment, more precise than 1/10 mm, optionally by knurled thumb screw or hexagon screwdriver. Precise vertical movements without lateral displacement are ensured thanks to the double wedge action. Application: For the clamping of heavy cast or forged items on large tool machines There is also the possibility to place the correcting wedge onto "heavy screw jacks". This requires parallel pins DIN 6325 (12 x 30 mm). Scope of delivery: Correcting wedge with spherical adapter Order No. 3930. Size Height adjustment h-H mm A mm B mm L mm A/F mm H* mm/U Load capacity kN 3930 Order No. € 60 47– 60 38 54 63 17 0.86 28 239.50 …0010 105 80–10558.5 87118241.16 70 517.00 …0020 155 135–155 93 125 140 46 2.02 175 1345.00 …0030 ​ (W340) Size Height adjustment h-H mm A mm B mm L mm A/F mm H* mm/U Load capacity kN 3894 Order No. € 63 50– 68 40 63 63 13 0.86 40 274.50 …0010 125 100–125 60 115 125 24 1.16 100 C …0020 190 170–190 80 145 175 36 2.02 250 C …0030 ​ (W342) Correction wedge * H mm/U = height adjustment per rotation. 3930 Recessed hexagon 3894 Protruding hexagon 3894 Design: Without screw jack elements. Powdercoated steel housing. All surfaces protected with rubber mats. 2 rollers and 2 castors with brakes. Application: Rapid deployment at the workplace. Clear, space-saving and always ready to hand as well as own design of the equipment by construction of many pick-up points. Height x Length mm 3802 Order No. € 1080 x 822 2079.00 …0031 ​ (W342) Tool trolley, empty 3930 Clamping elements 3.8

RkJQdWJsaXNoZXIy NTg4MTI=