Additional freight charges may apply for articles over 110 cm. Articles marked with ◊ are not stock items, they are procured at short notice. 3/161 Design: Base body and foot element made of tempered steel, burnished. Spindle and support smooth, tempering steel plasma-nitrided and burnished. Use as an additional supporting point to prevent deflection and vibration of the workpiece. Attached directly under the clamping point, it prevents the workpiece from being strained. Compensation of large workpiece tolerances (cast and forged parts). Use in horizontal and vertical fixtures. Application: Can be utilised on T-slots and grid plates by means of adapters which are screwed into the foot element. The support element can be sensitively adjusted under load up to a support height of max. height 330 mm. The supports can be adjusted with an angle of ± 3°. Note: Maximum height of 330 mm, 3 various supports are held by magnets. Supports (smooth, spherical, pointed) interchangeable. H minimum mm Height mm Load capacity kN 3802 Order No. € 210 230 35 C …0003 (W342) Height setting screw jack, with precision thread and foot element Design: With locknut for locking, centring hole diameter 12 mm. Spindle with trapezoidal thread completely made of quenched and heat-treated steel, spindle head burnished. Base body and foot element made of tempered steel, burnished. Application: Can be utilised on T-slots and grid plates by means of adapters which are screwed into the foot element. The individual elements are plugged together and connected in a process-safe manner by means of a threaded ring. The assembly tool enables operation of the lock nut and foot elements as well as the thread adapters. Note: The use as an head element in the modular screw jack enables a maximum height of 1626 mm with a permissible support force of 60 kN. Otherwise there is a risk of buckling. Do not adjust under load. H minimum mm H maximum mm TR mm Load capacity kN 3802 Order No. € 306 406 40 x 7 60 C …0005 (W342) Screw jack element Design: Tempered steel, burnished. The maximum height of 1626 mm can be reached incrementally and overlapping in height. The connection points are protected against contamination and there is improved handling due to individual elements. Setup time savings due to parts flexibility as well as optimisation of inventory management. Application: As a supplement to the modular screw jack to achieve the maximum permissible support height of 1626 mm. Note: The use as an intermediate element in the modular screw jack enables a maximum height of 1626 mm with a permissible support force of 60 kN. Otherwise there is a risk of buckling. Do not adjust under load. H mm Clamping height H1 mm Load capacity kN 3802 Order No. € 100 150–166.5 60 C …0007 200 250–266.5 60 C …0033 300 350–366.5 60 C …0009 (W342) Spacer element Clamping elements 3.8
RkJQdWJsaXNoZXIy NTg4MTI=