All prices quoted are non-binding recommended prices. 3/160 Design: Made of tempered steel, tempered, annealed in burnished finish. Application: For centring vices, Order No. 3929. ∅ D mm 3932 3399 Order No. € € 39 7.00 9.25 …0010 (W340) (W342) Ball attachment Design: Made of tempered steel, tempered, annealed in burnished finish. Application: For centring vices, Order No. 3929. Size A mm ∅ B mm C mm ∅ D mm ∅ E mm 3932 3399 Order No. € € 45 32 45 23 10–50 42 13.95 22.20 …0030 (W340) (W342) V-block attachment Design: Made of tempered steel, tempered, annealed in burnished finish. Application: The centring plate enables screw jacks with a 50 mm ∅ to be placed on all jacks and levelling or aligning elements with a 12 mm ∅ mounting hole. H mm D mm D1 mm 3932 3399 Order No. € € 8 45 35.8 9.55 13.55 …0090 (W340) (W342) Centring plate Design: Made of tempered steel, tempered, annealed in burnished finish. The ball is hardened. Application: This robust element is suitable for supporting and aligning cast and forged workpieces. Load capacity kN 3930 3399 Order No. € € 30 27.60 31.90 …0001 (W340) (W342) Attachment with rotatable ball Design: The modular design enables the use of different head and intermediate elements. This therefore makes a maximum height (with foot element 6425FG or 6425FY) of 1626 mm possible with a permissible support force of 60 kN, above which there is a risk of buckling. Do not adjust under load. The maximum height of 1626 mm can be reached incrementally and overlapping in height (with base element 6425FG or 6425FY). The connection points are protected against contamination. Improved handling due to individual elements as well as setup time savings due to parts flexibility. Storage optimisation. Application: Can be utilised on T-slots and grid plates by means of adapters which are screwed into the foot element. The individual elements are plugged together and connected in a process-safe manner by means of a threaded ring. The threaded ring must not be retightened under load. The assembly tool enables operation of the head element and foot element as well as the thread adapters. Scope of delivery: Screw jack element with base element 6425FB, small intermediate element, medium intermediate element, thread adapter M16, M20, M24, T-slot nuts slot 18, 22, 28, assembly tool. H minimum mm H maximum mm TR mm Load capacity kN 3802 Order No. € 306 706 40 x 7 60 C …0001 (W342) Modular screw jack Clamping elements 3.8
RkJQdWJsaXNoZXIy NTg4MTI=