FORMAT_EN_2023-25_WCT_Light

All prices quoted are non-binding recommended prices. 3/150 Design: Case-hardened and ground. Material: Steel C 15. Application: The T-nuts are inserted from the side following rough alignment. No T-nuts protruding on the bottom will disturb while transporting the jig and the machine table cannot be damaged. Nominal dimension of slots for machines b mm Nominal dimension of slots for device mm H mm h1 mm l mm 3905 Order No. € 10 12 12 3.6 20 C …5010 12 12 28.6 5.5 20 16.80 …5020 12 20 14 5.5 32 28.50 …5025 14 20 14 5.5 32 28.70 …5030 16 20 14 5.5 32 28.70 …5040 18 20 14 5.5 32 28.70 …5050 20 20 45.5 7 32 27.60 …5060 22 20 50.5 7 40 43.60 …5070 24 20 55.5 7 40 47.60 …5080 28 20 61.5 7 40 52.00 …5090 ​ (W342) Loose T-nut DIN 6323 Design: Height 1.5 d. One end is spherical for conical seats DIN 6319-D or G; the other end is flat for washers DIN 6340. Thread Collar Ø e mm Height m mm Radius r mm A/F mm Collar Ø e mm 3906 3384 Order No. € € M6 11.05 9 9 10 – – 0.45 …0005 M8 14.38 12 12 13 14.38 0.36 0.45 …0010 M10 17.77 15 15 16 – – 0.64 …0020 M10* 18.9 15 15 17 18.9 0.54 0.64 …0030 M12 20.03 18 17 18 – – 0.76 …0040 M12* 21.1 18 17 19 21.1 0.66 0.76 …0050 M14 23.36 21 20 21 23.36 0.96 1.35 …0060 M14* 24.49 21 20 22 – – 1.37 …0070 M16 26.75 24 22 24 26.75 1.04 1.35 …0080 M18 30.14 27 24 27 – – 2.68 …0090 M20 33.53 30 27 30 33.53 1.86 2.43 …0100 M22* 35.72 33 30 32 – – 4.32 …0120 M22 35.72 33 30 34 – – 4.32 …0110 M24 39.98 36 32 36 39.98 2.98 3.87 …0130 ​ (W340) (W342) Hexagon nut * Size not included in DIN, dimensions similar to DIN. DIN 6330 B 3906 Tempered, black 3384 Tempered to strength grade 10 3384 3906 Thread Jaw span mm Dimension e mm Height m mm Height a mm Collar ∅ mm 3907 3986 Order No. € € M8 13 13 14.38 12 3.5 18 0.66 0.70 …0200 M10 16 16 17.77 15 4 22 0.82 0.92 …0205 M12* 18 18 20.03 18 4 25 1.08 1.04 …0210 M16 24 24 26.75 24 5 31 1.82 2.02 …0215 M18 27 – 30.14 27 5 34 – 3.28 …0220 M20 30 30 33.53 30 6 37 2.60 3.53 …0225 M24 36 36 39.98 36 6 45 4.44 5.25 …0230 ​ (W340) (W342) * Size not included in DIN, dimensions similar to DIN. Design: Height 1.5 d. Forged and tempered. One end with collar so no need for washers, if the size of the bore or the clamping slot allows. Material: Heat treatable steel on strength grade 10. Hexagon nut, with collar DIN 6331 3986 3907 Clamping elements 3.8

RkJQdWJsaXNoZXIy NTg4MTI=