Additional freight charges may apply for articles over 110 cm. Articles marked with ◊ are not stock items, they are procured at short notice. 3/149 Design: Case-hardened and exactly ground for symmetry, tolerance compliant. Material: Steel C 15. Application: The fixed T-nuts are screwed into the standard, 20 mm wide aligning groove on vices or devices in pairs. You can work on machines with different slot widths by changing the T-nuts. Nominal dimension of slots for machines b mm Nominal dimension of slots for device mm Height mm Length mm For screws DIN 84/912 3905 Order No. € 10 20 10 22 M6 x 10 23.40 …0010 12 20 10 22 M6 x 10 23.40 …0020 14 20 10 25 M6 x 16 23.40 …0030 16 20 10 25 M6 x 16 23.40 …0040 18 20 10 25 M6 x 16 23.40 …0050 20* 20 12 32 M6 x 16 8.20 …0060 22 20 12 32 M6 x 16 29.30 …0070 24 20 12 32 M6 x 16 C …0080 28 20 12 32 M6 x 16 34.50 …0090 (W342) Fixed T-nut Mating surface h6, ground * Flat T-nut. Design: Long form, with internal thread. Material: Tempered to strength grade 10 Application: For precision machines; the large support surface reduces the strain on the machine bench slots. Note: The full load-bearing capacity can only be achieved when the entire thread length is screwed in. d x T-slot Dimension a mm Dimension e mm Measurement I mm Dimension h mm Dimension k mm 3903 3986 Order No. € € M6 x 8 7.7 13 26 10 6 2.35 3.88 …0010 M8 x 10 9.7 15 30 12 6 2.92 3.84 …0020 M10 x 12 11.7 18 36 14 7 2.92 4.20 …0030 M12 x 14 13.7 22 44 16 8 3.90 4.46 …0040 M14 x 16 15.7 25 50 18 9 – 5.55 …0050 M16 x 18 17.7 28 56 20 10 6.15 7.15 …0060 M18 x 20 19.7 32 64 24 12 – 10.10 …0070 M20 x 22 21.7 35 70 28 14 10.30 11.80 …0080 M24 x 28 27.7 44 88 36 18 20.10 23.00 …0090 (W340) (W342) T-slot nut DIN 508 Design: With internal thread and tempered. Application: Thanks to its special design, the T-nut can be inserted from above if lateral insertion is not possible. Note: The reduced support surface in the T-slot means that the load-bearing capacity is lower than on comparable T-nuts DIN 508. d x T-slot Dimension a mm Dimension e mm Dimension h mm Dimension k mm 3383 Order No. € M8 x 10 9.7 15 12 6 4.76 …0003 M10 x 12 11.7 18 14 7 4.76 …0005 M12 x 14 13.7 22 16 8 5.55 …0010 M14 x 16 15.7 25 18 9 6.60 …0015 M16 x 18 17.7 28 20 10 6.40 …0020 M20 x 22 21.7 35 28 14 10.65 …0030 M20 x 28 27.7 44 36 18 17.70 …0035 M24 x 28 27.7 44 36 18 16.90 …0040 (W342) Rhombus T-nut Clamping elements 3.8
RkJQdWJsaXNoZXIy NTg4MTI=