FORMAT_EN_2023-25_WCT_Light

All prices quoted are non-binding recommended prices. 3/134 Design: With hardened claw tips. Thus the clamping forces are increased by factor 3-5 in contrast to standard jaws and 5-sided machining is enabled in one clamping step. This results in less loss of material on the workpiece, shorter machining times as well as shortened production and costs per piece. Application: Can be used for the manual or hydraulic clamping of parallel raw and sawn parts on vices. For universal use by screwing on the RÖHM NC compact clamping system. Clever alternative to stamping. Jaw width mm Jaw height mm Jaw thickness mm 3847 3859 Order No. Set Set € € 92 32 14 C◊ C◊ …0092 125 40 16 581.50 C◊ …0125 160 50 18 818.00 C◊ …0160 ​ (W335) (W335) Set of claw jaws, for NC compact clamping system 3847 Claw jaw SKB with precision step. 3859 Claw jaw SKB without precision step. 3859 3847 Design: For NC compact clamping systems. Application: For front-end and base-side mounting. suitable for T-slot mm Thread 3851 Order No. € 12 M10 x 50 41.70 …0120 14 M12 x 55 44.60 …0140 16 M12 x 60 44.60 …0160 18 M16 x 60 50.00 …0180 20 M16 x 65 50.00 …0200 22 M16 x 65 50.00 …0220 ​ (W335) Single clamping claw, for NC compact clamp Design: Case-hardened and ground. For NC compact clamping systems. Scope of delivery: 2 T-nuts including attachment screws. Size Length mm 3851 Order No. € 20 x 12 22 37.50 …2012 20 x 14 25 40.30 …2014 20 x 16 25 43.00 …2016 20 x 18 25 45.90 …2018 20 x 20 22 48.80 …2020 20 x 22 32 51.40 …2022 ​ (W335) Fixed T-nut, for NC compact clamp Clamping solutions such as the embossing method are fully responding to current trends. In the process, a mark is embossed onto the workpiece in an embossing station. Special embossing jaws grip exactly into these small recesses on the clamping action into the vice. Exactly this very effect the innovative RÖHM claw jaws offer. Yet using this technology, your goals will be achieved even faster and more cost-effectively. Because ‘embossing’ and clamping are carried out in one single processing step – and you can spare an embossing station. Machine vices 3.87

RkJQdWJsaXNoZXIy NTg4MTI=