Additional freight charges may apply for articles over 110 cm. Articles marked with ◊ are not stock items, they are procured at short notice. 3/133 for jaw width mm Height mm 3800 Order No. € 125 13 68.00 …1015 125 15 68.00 …1020 125 22 68.00 …1025 125 35 68.00 …1030 125 39 72.00 …1035 160 14 78.00 …1040 160 30 78.00 …1045 160 44 78.00 …1050 (W330) Parallel insert Design: Reversible stepped jaw. For compact clamps RKE and RKE-LV. Jaw width mm Height mm 3846 Order No. € 92 32 417.00 …0092 125 40 694.00 …0126 160 50 1113.00 …0128 200 60 C◊ …0200 (W335) Stepped jaw set, SB Design: Short version. Application: Used when the clearance height to the machine table is too small. Size mm Length mm Width mm 3800 Order No. € 125–160 110 90 105.00 …6125 (W330) Hand crank Design: With locking ring. Note: Not suitable for high pressure vice NCA. Size mm Length mm Width mm 3800 Order No. € 125 125 120 73.00 …5125 160 160 127 73.00 …5160 (W330) Hand crank Jaw width mm for size 3840 3841 3842 Order No. Piece Piece Set € € € 92 1 55.60 97.10 – …0092 113 2 62.50 110.00 86.10 …0113 125 – 69.40 – – …0125 135 3 76.60 134.50 102.00 …0135 160 4 97.10 C◊ 134.50 …0160 200 5 125.00 C◊ – …0200 (W335) (W335) (W335) Clamping jaw, for machine vices 3840 Design: For machine vices (Order No. 3823) and (Order No. 3828). Standard jaws, smooth ground. One side smooth, one side grooved. 3841 Design: For machine vices (Order No. 3823) and (Order No. 3828). V-groove jaws. Horizontally and vertically ground V-blocks, hardened. 3842 Design: For machine vices (Order No. 3823) and (Order No. 3828). V-groove and standard jaws, with workpiece support. Unhardened and burnished. 3842 3841 3840 Machine vices 3.87
RkJQdWJsaXNoZXIy NTg4MTI=