Additional freight charges may apply for articles over 110 cm. Articles marked with ◊ are not stock items, they are procured at short notice. 3/127 Design: Body and jaws made of steel, hardened (60 HRC) and ground. The tolerance range is within 0.02 mm. Draw-down jaws also lockable. Fastening is done by grid holes or jaws. Application: For use on machining centres and machine tools with high working accuracy. Note: Rotary plate upon request. Scope of delivery: Including hand crank. Jaw width mm Clamping width mm Jaw height mm Total length mm Clamping force kN Weight kg 3836 Order No. € 125 150 40 401 30 12.7 602.00 …1125 150 200 50 487 50 25.6 722.00 …1152 150 300 50 587 50 29.5 900.50 B …1153 175 400 60 701 60 51.2 1262.00 B …1175 (W336) Machine vice, mechanical Design: With ground contact edge and graduation. The vice is fixed on the rotary plate by means of T-slot screws and T-nuts. Application: For centring vices Order No. 3828. Scope of delivery: Rotary plate with the necessary T-slot screws and nuts. Universal rotary plate for size Diameter mm Weight kg 3831 Order No. € 2 245 5 421.50 …0006 3 295 8 502.50 …0011 4 345 11.5 640.50 …0016 5 450 16.5 794.50 …0021 6 450 17.3 803.00 …0026 (W328) Design: High accuracy and wear resistance due to precise, hardened jaw guides. Stepwise clamping force presetting. Optimal coolant and chip flow due to optimised design. Application: For use on machining centres and machine tools with high working accuracy. Scope of delivery: Including hand crank. Jaw width mm Clamping width mm Jaw height mm Total length mm Clamping force kN Weight kg 3377 Order No. € 113 170 31.6 583 30 24 1689.00 …0113 135 220 39.6 679 40 39 2076.00 B …0135 160 310 49.6 817 50 60 2618.00 B …0160 (W336) Machine vice, mechanical power boosted Machine vices 3.87
RkJQdWJsaXNoZXIy NTg4MTI=