FORMAT_EN_2023-25_WCT_Light

All prices quoted are non-binding recommended prices. 3/126 Design: Large clamping range, body made of special cast iron. The interchangeable and reversible jaws are hardened, ground and burnished, one of the jaws is smooth and the other comes with longitudinal and transverse prisms. Both jaws have support surfaces to clamp flat workpieces. With universal fixing option through mounting slots and oblong holes. With pushedthrough T-handle. Application: For clamping workpieces on drills. Jaw width mm Clamping width mm Slot distance mm Weight kg 3372 Order No. € 110 130 140 9.5 375.00 …0110 135 160 170 13.5 454.00 …0135 160 220 210 25 715.50 …0160 ​ (W328) Precision drilling machine vice Design: Body made from special cast iron, with hardened and ground clamping jaws. Application: For clamping of workpieces on drilling/milling machines and machining centres. Scope of delivery: Machine vice with hand crank. Size Jaw width mm Clamping width mm Jaw height mm Clamping force kN Open length mm Weight kg 3823 Order No. € 1 92 85 31.6 18 362 12 530.50 …1092 2 113 105 31.6 25 423 13.5 643.00 …2113 3 135 125 39.6 35 510 25 822.00 …3135 4 160 145 49.6 45 575 40 1032.00 B…4160 ​ (W328) Machine vice, mechanical Design: Low, sturdy design, body made of special cast iron. The interchangeable and reversible jaws are hardened, ground and burnished, one of the jaws is smooth and the other comes with longitudinal and transverse prisms. The jaws are mechanically adjusted and the hand crank is used to bridge the whole clamping range. The spindle is covered and thus protected from dirt and chips. With centric clamping, the lateral guides allow for easy and precise arrangement of the vice. Application: For milling and planing all types of moulds, slots and grooves. The centric clamping makes it possible to use with various workpiece widths without affecting the central position of the workpieces. Size Jaw width mm Clamping width mm Jaw height mm Clamping force kN Open length mm Height mm Weight kg 3828 Order No. € 2 113 110 31.6 15 358 93.5 12.4 889.00 …2113 3 135 140 39.6 22 408 106 19 1069.00 …3135 4 160 180 49.6 24 495 124.5 31 1533.00 B …4160 5 200 300 62.6 25 655 142.5 52 2091.00 B …5200 6 250 400 62.6 28 767 148.5 71 2536.00 B …6250 ​ (W328) Centric vice, mechanical Design: With ground contact edge and graduation. The vice is fixed on the rotary plate by means of fastening screws and T-nuts. Application: For machine vices Order No. 3823. for size Diameter mm 3834 Order No. € 1/ 2 242 375.00 …0007 3 280 377.50 …0011 4 340 428.50 …0016 ​ (W328) Rotary plate Scope of delivery: Standard rotary plate including necessary fastening screws and T-nuts. Machine vices 3.87

RkJQdWJsaXNoZXIy NTg4MTI=