Additional freight charges may apply for articles over 110 cm. Articles marked with ◊ are not stock items, they are procured at short notice. 3/97 Design: CoAE small range of products, clamping diameter 12-50 mm, turning range 13-100 mm, hydraulic. Application: For efficient turning of workpieces over their entire length in one setup with high accuracy. Designed based on the modular principle, therefore universal exchange of driving plates and centres possible. Hydraulic or mechanic pressure equalisation results in uniform clamping force also in case of uneven workpiece faces. Workpiece face longitudinal stop by spring-loaded centre punch. Scope of delivery: Constant face driver range of products with 1 base body, 4 driver heads, clamping diameters 12, 20, 32 and 50 mm and 2 centres, diameter A = 6 + 12 mm. MT Running direction 3617 Order No. € 3 Right C …0005 3 Left C …0010 4 Right C …0015 4 Left C …0020 5 Right 1354.00 …0025 5 Left C …0030 6 Right C …0035 6 Left C …0040 (W311) Constant face driver range of products, CoAE Design: Basic chuck with precisely adapted intermediate flange with short taper DIN 55027/ISO 702/III. Greater holding power and accurate concentricity due to collets as three-jaw chucks. Application: Conventional and CNC machines, e.g. for turning, drilling, milling and grinding. Ideal for small series. Scope of delivery: Security key, bolts and nuts. Clamping range mm Short taper D mm D1 mm D2 mm L mm Collet 3614 Order No. € 1–42 5 90 167 133.4 127 173E*, 780E* 1926.00 …0005 1–42 6 90 137 104.8 116 173E, 775E* 1965.00 …0010 (W001) Hand clamping chuck, HSPF 40 * Available upon request. Design: According to DIN 6343 with a smooth bore (up to Ø 8 mm) or transverse grooves (from Ø 8.5 mm). Clamping bridging: h9, i.e. only nominal size can be clamped. Application: For workpiece clamping (bar or chuck work) in conventional, single-spindle lathes, e.g. with hand clamping chucks HSPF and CNC turning machines directly in the spindle or in a collet chuck. Hole mm F mm K mm L mm 3615 Order No. € 3 48 60 94 64.30 …0001 4 48 60 94 64.30 …0004 5 48 60 94 64.30 …0007 6 48 60 94 64.30 …0010 7 48 60 94 64.30 …0013 8 48 60 94 64.30 …0016 9 48 60 94 64.30 …0019 10 48 60 94 64.30 …0022 11 48 60 94 64.30 …0025 12 48 60 94 64.30 …0028 13 48 60 94 64.30 …0031 14 48 60 94 64.30 …0034 15 48 60 94 64.30 …0037 16 48 60 94 64.30 …0040 17 48 60 94 64.30 …0043 (W319) Hole mm F mm K mm L mm 3615 Order No. € 18 48 60 94 64.30 …0046 19 48 60 94 64.30 …0049 20 48 60 94 64.30 …0052 21 48 60 94 64.30 …0055 22 48 60 94 64.30 …0058 23 48 60 94 64.30 …0061 24 48 60 94 64.30 …0064 25 48 60 94 64.30 …0067 26 48 60 94 64.30 …0070 27 48 60 94 64.30 …0073 28 48 60 94 64.30 …0076 29 48 60 94 64.30 …0079 30 48 60 94 64.30 …0082 31 48 60 94 64.30 …0085 32 48 60 94 64.30 …0088 (W319) Hole mm F mm K mm L mm 3615 Order No. € 33 48 60 94 64.30 …0091 34 48 60 94 64.30 …0094 35 48 60 94 64.30 …0097 36 48 60 94 64.30 …0100 37 48 60 94 64.30 …0103 38 48 60 94 64.30 …0106 39 48 60 94 64.30 …0109 40 48 60 94 64.30 …0112 41 48 60 94 64.30 …0115 42 48 60 94 64.30 …0118 (W319) Pressure collet chuck, 173E Up to Ø 8.0 with a smooth bore, from Ø 9.0 mm with grooves. Centring tips 3.3
RkJQdWJsaXNoZXIy NTg4MTI=