FORMAT_EN_2023-25_WCT_Light

All prices quoted are non-binding recommended prices. 3/92 Design: Moving point hardened and ground, with tip angle 60°. Application: For lightweight workpieces. Holding fixture MT 3 4 5 Size K33 K34 K35 Dimension A mm 82.5 101.5 128 Dimension B mm 55 68.5 88.5 Dimension D mm 25 32 40 Dimension G mm 23.825 32.267 44.399 Dimension K mm 30.3 39.8 49.3 max. concentricity mm 0.005 0.005 0.005 max. workpiece weight kg 300 500 630 max. rpm min-1 8500 6000 4500 3304 € 212.00 274.00 408.00 (W310) Order No. …0015 …0020 …0025 Revolving centring tip ≤ 5 µm 60° Design: Body hardened and ground, with tip angle 60°. Moving point with non-wearing carbide insert. Triple bearing for high axial and radial strength. Lubricated for life. Holding fixture MT 2 3 3 4 5 6 Size 102 104 106 108 110 114 Dimension A mm 65 70.5 79.5 102.5 129 152 Dimension B mm 43 48.5 58.5 68.5 88.5 102.5 Dimension C mm 11 11 14 14 18 18 Dimension D mm 20 22 25 32 40 50 Dimension G mm 17.78 23.825 23.825 31.267 44.399 63.348 Dimension K mm 24 27 30.5 40 49.5 57 max. concentricity mm 0.005 0.005 0.005 0.005 0.005 0.01 max. workpiece weight kg 120 240 360 500 1000 1800 max. rpm min-1 7000 6300 5000 3800 3000 2600 3305 € 531.50 552.50 647.00 738.00 1071.00 2137.00 (W309) Order No. …0102 …0104 …0106 …0108 …0110 …0114 Revolving centring tip, PRO HM Carbide 60° Design: Body and point drop forged, hardened and ground. Moving point can be reground several times and shank-mounted, with tip angle 60°. The precision bearing is protected from dirt and coolant by the special lip seal. The shank is ground, with hole for easy dismantling. The permissible load is reduced by the extended moving point. With short projection length and lowvibration running. Application: For precision turning and rough machining, for universal use on all lathes Particularly suitable for copy turning. The extended point enables unobstructed movement of the sliding rests. Holding fixture MT 1 2 3 4 5 Size 101 102 106 108 110 Dimension A mm 70.5 75 95.5 114.5 143.5 Dimension B mm 34.5 43 58.5 68.5 88.5 Dimension D mm 15 20 25 32 40 Dimension G mm 12.065 17.78 23.825 31.267 44.399 Dimension J mm 9 10 12 14 16 Dimension K mm 27 34 47 53 65 max. concentricity mm 0.01 0.005 0.005 0.005 0.005 max. workpiece weight kg 80 140 400 500 1200 max. rpm min-1 7000 7000 5000 3800 3000 3306 € 318.00 318.00 389.50 446.00 641.50 (W309) Order No. …0005 …0010 …0015 …0020 …0025 Revolving centring tip, HVL PRO, extended 60° A K % ' & * . $ A K Centring tips 3.3

RkJQdWJsaXNoZXIy NTg4MTI=