FORMAT_EN_2023-25_WCT_Light

Additional freight charges may apply for articles over 110 cm. Articles marked with ◊ are not stock items, they are procured at short notice. 3/91 Application: For use in centres. d1 mm D mm L mm 3319 Order No. Centre punches € 12 14 20 20.00 …0001 14 16 21 24.00 …0022 18 22 27 30.00 …0043 24 28 34 C◊ …0061 ​ (W312) Interchangeable insert d1 mm D mm D mm L mm 3319 Order No. Hollow punches € 12 14 4 15 24.00 …0004 14 16 4 17 28.10 …0025 18 22 5 21 33.60 …0046 24 28 6 27 C◊ …0064 ​ (W312) d1 mm D mm D mm L mm 3319 Order No. Hollow taper € 12 11 4 15 44.60 …0019 14 22 4 17 51.90 …0040 ​ (W312) d1 mm D mm D mm L mm 3319 Order No. Taper € 12 28 13 23 30.00 …0010 14 44 24 28 40.00 …0031 18 55 30 34 55.90 …0052 24 68 36 41 C◊ …0070 ​ (W312) d1 mm D mm D mm L mm 3319 Order No. Hollow taper € 12 20 10 17 37.90 …0013 14 35 20 23 50.00 …0034 18 42 25 28 61.90 …0055 24 60 37 35 C◊ …0073 ​ (W312) d1 mm D mm L mm 3319 Order No. Centre punches, large € 12 17 23 25.20 …0007 14 25 31 30.00 …0028 18 32 40 36.00 …0049 24 38 45 C◊ …0067 ​ (W312) d1 mm D mm D mm L mm 3319 Order No. Copying punches € 12 14 432 24.00 …0016 14 18 835 30.00 …0037 18 22 843 37.90 …0058 24 28 10 52 C◊ …0076 ​ (W312) Design: Body and point drop forged, hardened and ground, with 60° tip angle. The precision bearing is protected from dirt and coolant by the special lip seal. Application: For all turning operations, especially machining workpieces needing a small head diameter size. Holding fixture MT 2 3 4 5 Size 02 04 08 10 Dimension A mm 62 62 75.5 106 Dimension B mm 32 34 42 58 Dimension D mm 15 15 20 30 Dimension G mm 17.78 23.825 31.267 44.399 Dimension K mm 19.5 19.5 24.5 37 max. concentricity mm 0.005 0.005 0.01 0.005 max. workpiece weight kg 200 400 800 1600 max. rpm min-1 7000 7000 6300 4300 3321 € 184.50 192.50 255.00 372.50 (W310) Order No. …0001 …0004 …0007 …0010 Revolving centring tip, SLIM normal 60° Design: Moving point hardened and ground, with tip angle 60°. Holding fixture MT 1 2 3 4 5 Size 101 102 104 108 110 Dimension A mm 60.5 65 70.5 102.5 129 Dimension B mm 34.5 43 48.5 63.5 88.5 Dimension D mm 15 20 22 32 40 Dimension G mm 12.065 17.78 23.825 31.267 44.399 Dimension K mm 17 24 27 40 49.5 max. concentricity mm 0.005 0.005 0.005 0.005 0.005 max. workpiece weight kg 100 200 400 800 2000 max. rpm min-1 7000 7000 6300 3800 3800 3303 € 126.00 152.00 181.50 222.50 342.50 (W310) Order No. …0005 …0010 …0015 …0020 …0025 Revolving centring tip ≤ 5 µm 60° 60°/30° 60° 60° A K A K Centring tips 3.3

RkJQdWJsaXNoZXIy NTg4MTI=