All prices quoted are non-binding recommended prices. 3/64 Application: For standard clamping nuts type ER. for size 3207 Order No. € ER16 15.20 …0016 ER20 18.95 …0020 ER25 15.20 …0025 ER32 20.30 …0032 ER40 27.80 …0040 (W050) Chuck key Design: With VKT adaptation to the defined tightening of the clamping nuts with a torque wrench. Note: The outer diameter of the clamping nut must comply with DIN tolerances. for clamping nut Square mm 3657 Order No. € HPC11M 9 x 12 71.00 …0013 HPC16/ST16 14 x 18 71.00 …0931 (W315) for clamping nut Square mm 3657 Order No. € HPC25/ST25 14 x 18 71.00 …1440 HPC32/ST32 14 x 18 71.00 …1450 (W315) Torque roller wrench attachment, DRO Design: Two-armed torque wrenches for optimal power transmission due to even introduction of forces, controlled concentricity, no one-sided clamping. For highest clamping and repeat accuracy with dial gauge. Maximum torque for highest clamping forces, no small clamping diameters overload. Size 3648 Order No. € ER16/ER25/ ER32 C◊ …0100 (W389) Torque spanner, Power Collet Chuck for collet chuck 3648 Order No. € ER16 C◊ …0116 ER25 C◊ …0125 ER32 C◊ …0132 (W389) Socket, for torque spanners Design: For use on the FAHRION CENTRO P. Roller wrench with standard handle. Application: Enables uncomplicated clamping of tools without risk of injury, no slipping as possible with standard or hook spanners. Note: The outer diameter of the clamping nut must comply with DIN tolerances. for clamping nut ∅ mm 3657 Order No. € HPC8M 10 99.20 …0011 HPC11M 16 71.00 …0012 HPC16MS 22 71.00 …0024 HPC16/ST16 30 71.00 …0300 (W315) for clamping nut ∅ mm 3657 Order No. € HPC25/ST25 40 71.00 …0400 HPC32/ST32 50 71.00 …0500 HPC40/ST40 63 77.80 …0630 (W315) Roller wrench, for HPC clamping nuts Tool holders 3.1
RkJQdWJsaXNoZXIy NTg4MTI=