Additional freight charges may apply for articles over 110 cm. Articles marked with ◊ are not stock items, they are procured at short notice. 3/63 Design: For use in the FAHRION CENTRO P for high performance cutting, with double-cylinder guide, trapezoidal thread and coated surface to reduce friction, for high holding torque and to improve concentricity. Type Clamping range mm max. ∅ mm Total length mm for collet chuck 3657 Order No. € HPC8M 1– 5 10 12 GERC8-HP 45.10 …3008 HPC11M 1– 7 16 16.2 GERC11-HP 39.50 …3011 HPC16MS 1–10 22 20.9 GERC16-HP, -HPD 39.50 …3016 (W315) Type Clamping range mm max. ∅ mm Total length mm for collet chuck 3657 Order No. € HPC16 1–10 30 23.4 GERC16-HP, -HPD 33.80 …1016 HPC25 2–16 40 25.6 GERC25-HP, -HPD, -HPDD 37.20 …1025 HPC32 2–20 50 26.9 GERC32-HP, -HPD, -HPDD 39.50 …1032 (W315) Clamp nut, HPC 3657 3008 – 3016 Design: Mini, with extreme slim structure. 3657 1016 – 1032 Design: Normal. Design: Hardened and galvanised. Application: For clamping nuts ER according to DIN ISO 15488. for size 3643 Order No. € ER16 12.90 …0016 ER20 13.75 …0020 ER25 14.90 …0025 ER32 20.90 …0032 ER40 27.70 …0040 (W303) Collet key, made of special steel Design: Made of special steel, hardened and galvanised, drive 1/2” square. Application: For clamping nuts ER according to DIN ISO 15488. Prevent spindle damage through controlled tightening in the machine when changing tools. Note: Torque spanner setting value depends on the extension length S. for size S mm 3643 Order No. € ER16 45 44.50 …0116 ER25 60 45.60 …0125 ER32 60 53.00 …0132 ER40 60 59.80 …0140 (W303) Collet key, with adapter for torque spanner for size 3204 Order No. € ER11 14.90 …0011 ER16 14.90 …0016 ER20 18.45 …0020 ER25 19.05 …0025 (W057) Mini collet key Tool holders 3.1
RkJQdWJsaXNoZXIy NTg4MTI=