FORMAT_EN_2023-25_WCT_Light

Additional freight charges may apply for articles over 110 cm. Articles marked with ◊ are not stock items, they are procured at short notice. 3/59 Design: Precision collets GERC-HPDD similar to DIN ISO 15488-A (old DIN 6499). The collets have an averaged system accuracy of 3 µm (with distance 3 x D max. 50 mm) in precision collet chucks. They have a seal for internal cooling (up to 80 bar) and additional spray nozzles so that, in the case of a workpiece without a cooling channel, the coolant sprays up to the cut. Shanks with lateral face can only be used in a limited way, i.e. the face must be behind the rubber plug to ensure sealing. They are especially suitable for use in the HSC range and for high-precision machining results in CENTRO P. The GERC-HPDD do not have clamping diameter bridging (tolerance h8), neither in CENTRO P nor in the standard collet chuck, where the blue identification ring, which does not have any sealing function, needs to be removed. GERC25-HPPDD/429E ∅ mm D mm L mm 3600 Order No. € 4 26 34 94.70 …0007 6 26 34 94.70 …0013 8 26 34 94.70 …0019 10 26 34 94.70 …0025 12 26 34 94.70 …0028 14 26 34 94.70 …0031 ​ (W315) GERC32-HPDD/469E ∅ mm D mm L mm 3602 Order No. € 4 26 34 98.10 …0007 6 26 34 98.10 …0013 8 26 34 98.10 …0019 10 26 34 98.10 …0025 12 26 34 98.10 …0028 14 26 34 98.10 …0031 16 26 34 98.10 …0034 18 26 34 98.10 …0037 ​ (W315) GERC-HPDD collet ',1 HSC Design: Similar to ISO 15488-A (old DIN 6499). The tap collets GERC-GBD have a concentricity of 10 µm and can be used in precision collet chucks CENTRO P, in tapping chucks SYNCHRO T and in standard collet chucks. They have a square drive for driving the tap as well as a seal for internal cooling up to 80 bar. They are all protected against Corrosion with the FAHRION Protect coating . Application: Can be utilised both for DIN as well as for ISO taps. GERC16-GBD/4031E ∅ mm Square mm D mm L mm L2 mm 3597 Order No. € 2.8 2.1 16.7 27.5 18 59.60 …0101 3.5 2.7 16.7 27.5 18 50.60 …0104 4 3.2 16.7 27.5 18 50.60 …0107 4.5 3.55 16.7 27.5 18 50.60 …0110 5 4 16.7 27.5 18 50.60 …0113 5.5 4.5 16.7 27.5 18 50.60 …0116 6 5 16.7 27.5 18 50.60 …0119 7 5.6 16.7 27.5 18 50.60 …0122 8 6.3 16.7 27.5 22 50.60 …0125 ​ (W319) GERC20-GBD/4276E ∅ mm Square mm D mm L mm L2 mm 3597 Order No. € 3.5 2.7 20.7 31.5 18 53.30 …0127 4 3 20.7 31.5 18 53.30 …0129 4.5 3.4 20.7 31.5 18 53.30 …0131 5.5 4.3 20.7 31.5 18 53.30 …0133 6 4.9 20.7 31.5 18 53.30 …0135 7 5.5 20.7 31.5 18 53.30 …0137 8 6.2 20.7 31.5 18 53.30 …0139 9 7 20.7 31.5 22 53.30 …0141 10 8 20.7 31.5 22 53.30 …0143 11 9 20.7 31.5 25 53.30 …0145 ​ (W319) GERC25-GBD/4282E ∅ mm Square mm D mm L mm L2 mm 3597 Order No. € 3.5 2.7 25.7 34 18 55.70 …0151 4 3.2 25.7 34 18 55.70 …0154 4.5 3.55 25.7 34 18 55.70 …0157 5 4 25.7 34 18 55.70 …0160 5.5 4.5 25.7 34 18 55.70 …0163 6 5 25.7 34 18 55.70 …0166 7 5.6 25.7 34 18 55.70 …0169 8 6.3 25.7 34 22 55.70 …0172 9 7.1 25.7 34 22 55.70 …0175 10 8 25.7 34 25 55.70 …0178 11 9 25.7 34 25 55.70 …0181 12 9 25.7 34 25 55.70 …0184 ​ (W319) GERC32-GBD/4537E ∅ mm Square mm D mm L mm L2 mm 3597 Order No. € 4 3.2 32.7 40 18 61.20 …0000 4.5 3.55 32.7 40 18 61.20 …0001 5 4 32.7 40 18 61.20 …0002 5.5 4.5 32.7 40 18 61.20 …0004 6 5 32.7 40 18 61.20 …0007 7 5.6 32.7 40 18 61.20 …0010 8 6.6 32.7 40 22 61.20 …0013 ​ (W319) Tap collet, GERC-GBD, sealed DIN 6499 B Continued on next page Tool holders 3.1

RkJQdWJsaXNoZXIy NTg4MTI=