All prices quoted are non-binding recommended prices. 3/58 Design: Precision collets GERC-HPD similar to DIN ISO 15488-A (old DIN 6499). The collets have an average system accuracy of 3 µm (with distance 3 x D max. 50 mm) in precision collet chucks (for GERC8-HP it is 6 µm). They are all protected against corrosion with the new FAHRION Protect coating. GERC-HPD collets have a seal for internal cooling and can be used up to 80 bar. Shanks with lateral face can only be used in a limited way, i.e. the face must be behind the rubber plug to ensure sealing. They are especially suitable for use in the HSC range and for high-precision machining results. GERC-HPD does not have clamping diameter bridging (tolerance h8). During use in a standard collet chuck, the blue identification ring must be removed. GERC16-HPD/425E ∅ mm D mm L mm 3579 Order No. € 3 16.7 27.5 60.70 …0004 4 16.7 27.5 60.70 …0007 5 16.7 27.5 66.50 …0010 6 16.7 27.5 60.70 …0013 8 16.7 27.5 60.70 …0019 10 16.7 27.5 60.70 …0025 (W315) GERC25-HPD/429E ∅ mm D mm L mm 3577 Order No. € 3 25.7 34 69.90 …0004 4 25.7 34 64.10 …0007 5 25.7 34 69.90 …0010 6 25.7 34 64.10 …0013 8 25.7 34 64.10 …0019 10 25.7 34 64.10 …0025 12 25.7 34 64.10 …0028 14 25.7 34 64.10 …0031 16 25.7 34 64.10 …0034 (W315) GERC32-HPD/469E ∅ mm D mm L mm 3578 Order No. € 3 32.7 40 72.20 …0004 4 32.7 40 66.30 …0007 5 32.7 40 72.20 …0010 6 32.7 40 66.30 …0013 8 32.7 40 66.30 …0019 10 32.7 40 66.30 …0025 12 32.7 40 66.30 …0028 14 32.7 40 66.30 …0031 16 32.7 40 66.30 …0034 18 32.7 40 66.30 …0037 20 32.7 40 66.30 …0040 (W315) Collet, GERC-HPD, sealed ',1 HSC Design: DIN ISO 15488-B (DIN 6499 old). Averaged system accuracy 3 µm in CENTRO P. All collets are protected against corrosion by the FAHRION Protect coating. Clamping range ∅ mm Collet type Set content 3578 Order No. € 3–10 GERC16-HP 3; 4; 5; 6; 8; 10 287.50 …0100 3–10 GERC16-HPD 3; 4; 5; 6; 8; 10 386.50 …0103 4–16 GERC25-HP 4; 6; 8; 10; 12; 14; 16 347.50 …0106 4–16 GERC25-HPD 4; 6; 8; 10; 12; 14; 16 471.50 …0109 4–20 GERC32-HP 4; 6; 8; 10; 12; 14; 16; 20 400.50 …0112 4–20 GERC32-HPD 4; 6; 8; 10; 12; 14; 16; 20 554.50 …0115 (W315) Collet set, GERC-HP and HPD Tool holders 3.1
RkJQdWJsaXNoZXIy NTg4MTI=