All prices quoted are non-binding recommended prices. 3/26 Design: From alloy case-hardened steel, with a core tensile strength of min. approx. 800 N/mm2 and a hardness depth of min. 0.8 mm. Taper to DIN 254. All functional surfaces precisely machined. Taper angle tolerance: AT3 Taper surface roughness: Ra < 0.001 mm Hardened: 58 ± 2 HRC Application: For mounting and holding tools with dado Scope of delivery: Combi shell end mill arbour with cutter retaining screw. D mm A mm L mm D mm 3097 Order No. SK 40 € 22 30 19 48 58.40 …4022 27 30 21 58 60.40 …4027 32 30 24 78 64.40 …4032 40 30 27 88 76.40 …4040 (W050) D mm A mm L mm D mm 3097 Order No. SK 50 € 22 35 19 48 78.40 …5022 27 35 21 58 78.40 …5027 32 40 24 78 82.50 …5032 40 33 27 88 92.60 …5040 (W050) Cross groove face mill adaptor d = 40 with four additional threaded holes according to DIN 2079 for large indexable face mills. DIN 2080 A ≤ 5 µm Design: From alloy case-hardened steel, with a core tensile strength of min. approx. 800 N/mm2 and a hardness depth of min. 0.8 mm. Taper to DIN 254. Taper angle tolerance: AT3 Taper surface roughness: Ra < 0.0001 mm Hardened: 58 ± 2 HRC Application: For mounting and holding tools with Morse taper shank and tangs. MT inner A mm D mm 3098 Order No. SK 40 € 1 50 25 44.30 …4001 2 50 32 44.30 …4002 3 65 40 44.30 …4003 4 95 48 48.30 …4004 (W050) MT inner A mm D mm 3098 Order No. SK 50 € 1 45 25 64.40 …5001 2 60 32 64.40 …5002 3 65 40 64.40 …5003 4 70 48 64.40 …5004 5 105 53 68.40 …5005 (W050) Spacer DIN 2080 A ≤ 5 µm Design: Guide elements of rigid design, hardened and ground wear parts ensure high concentricity and long life. 100 % concentricity test with different plug gauge diameters at various measuring points, based on DIN ISO 10888. Compact design and high rigidity result in best machining results. High clamping forces are reached with low effort thanks to the integrated worm gear, holding torque > 75 Nm at ∅ 13 mm. Machining is safe thanks to automatic blocking of the worm gear even when running anti-clockwise and quickly decelerated spindle. Taper angle tolerance: AT3 Taper surface roughness: Ra < 0.001 mm Max. permissible speed: 7000 min-1 Balancing quality: pre-balanced up to 7000 rpm at a residual imbalance of maximum 40 gmm Application: For drilling, countersinking, reaming, thread cutting and for simple finishing milling work. Can be used in machining centres, turning, drilling and milling machines. Scope of delivery: Short drill chuck with hexagon spanner. Note: Higher speeds possible with special balancing. Clamping range d1 mm SK l1 mm d2 mm 3522 Order No. € 1–16 40 73 50 283.00 …0101 (W324) CNC short drill chuck for clockwise and anti-clockwise rotation DIN 2080 A ≤ 30 µm Tool holders 3.1
RkJQdWJsaXNoZXIy NTg4MTI=