FORMAT_EN_2023-25_WCT_Light

All prices quoted are non-binding recommended prices. 3/18 Design: Material with tensile strength of from 1600 to 1800 N/mm2, hardness of 52 ±2 HRC. Hydraulic fluid is compressed using a hydraulic clamping set (pressure screw, pressure pin, seal) using a hexagonal T-key. The pressure causes an even deformation of the expansion sleeve, which can cause the tool shank to be clamped with a high concentricity (max. 3 µm). Taper to DIN 254. Hole for data carrier/chip (Balluf). Taper angle tolerance: AT3 Maximum speed:. 40000 min-1 Optimum application temperature: 20–50 °C Coolant pressure maximum: 80 bar Adjustment track: 10 mm Scope of delivery: Hydraulic expansion clamping chuck with hexagonal T-key. d1 mm d2 mm d3 mm l1 mm l2 mm l3 mm l4 mm g A/F mm 3439 Order No. SK 40 € 6 26 49.5 80.5 37 10 29 M5 2.5 424.50 …0002 6 26 49.5 110 37 10 29 M5 2.5 607.50 …0006 8 28 49.5 80.5 37 10 30 M6 3 424.50 …0008 8 28 49.5 110 37 10 30 M6 3 607.50 …0011 10 30 49.5 80.5 41 10 35 M8 x 1 3 424.50 …0014 10 30 49.5 110 41 10 35 M8 x 1 3 607.50 …0017 12 32 49.5 80.5 46 10 40 M10 x 1 5 424.50 …0020 12 32 49.5 110 46 10 40 M10 x 1 5 607.50 …0023 14 34 49.5 80.5 46 10 40 M10 x 1 5 424.50 …0026 14 34 49.5 110 46 10 40 M10 x 1 5 607.50 …0029 16 38 49.5 80.5 49 10 45 M10 x 1 5 424.50 …0032 16 38 49.5 110 49 10 45 M12 x 1 5 607.50 …0035 18 40 49.5 80.5 49 10 46 M10 x 1 5 424.50 …0038 18 40 49.5 110 49 10 46 M12 x 1 5 607.50 …0041 20 42 49.5 80.5 51 10 47 M10 x 1 8 424.50 …0044 20 42 49.5 110 51 10 47 M16 x 1 8 607.50 …0047 25 55 63 80.5 57 10 28 M16 x 1 8 424.50 …0050 25 55 63 110 57 10 28 M16 x 1 8 607.50 …0053 32 63 70 80.5 61 10 25.5 M16 x 1 8 424.50 …0056 32 63 59 110 61 10 50 M16 x 1 8 607.50 …0059 ​ (W326) d1 mm d2 mm d3 mm l1 mm l2 mm l3 mm l4 mm g A/F mm 3440 Order No. SK 50 € 6 26 49.5 80.5 37 10 29 M5 2.5 545.50 …0002 8 28 49.5 80.5 37 10 30 M6 3 545.50 …0008 10 30 49.5 80.5 41 10 35 M8 x 1 4 545.50 …0014 12 32 49.5 80.5 46 10 39 M10 x 1 5 545.50 …0020 14 34 49.5 80.5 46 10 37 M10 x 1 5 545.50 …0026 16 38 49.5 80.5 49 10 40 M12 x 1 6 545.50 …0032 18 40 49.5 80.5 49 10 41 M12 x 1 6 545.50 …0038 20 42 49.5 80.5 51 10 42 M16 x 1 8 545.50 …0044 25 55 60 100 57 10 48 M16 x 1 8 545.50 …0050 32 63 70 100 61 10 61 M16 x 1 8 545.50 …0056 ​ (W326) Precision hydraulic expansion chuck, short, slim ISO 7388-1 AD/B ≤ 3 µm Design: Axial longitudinal setting, for tool shank tolerance h6. Hydraulic fluid is compressed using a hydraulic clamping set (pressure screw, pressure pin, seal) using a hexagonal T-key. The pressure causes an even deformation of the expansion sleeve, which can cause the tool shank to be clamped with a high concentricity (max. 3 µm). Boreholes for form B closed with grub screws on delivery. Scope of delivery: Hydraulic expansion chuck incl. length setting screw and hexagonal chuck key with cross handle. d1 mm SK d2 mm d4 mm l1 mm l2 mm l5 mm A/F mm 3380 Order No. € 6 40 26 49.5 80.5 37 29.5 5 C◊ …0600 8 40 28 49.5 80.5 37 30 5 C◊ …0800 10 40 30 49.5 80.5 41 31 5 C◊ …1000 ​ (W321) Hydraulic expansion chuck, SK with increased clamping force ISO 7388-1 AD/B ≤ 3 µm Continued on next page l2 l5 d4 10 SK l1 A d1 SW d2 0,003 A Tool holders 3.1

RkJQdWJsaXNoZXIy NTg4MTI=