Additional freight charges may apply for articles over 110 cm. Articles marked with ◊ are not stock items, they are procured at short notice. 3/17 Design: From alloy case-hardened steel, with a core tensile strength of min. approx. 950 N/mm2 and a hardness depth of min. 0.5 mm. Taper to DIN 254. Clamping using a hex spanner considerably increases clamping force in comparison to conventional chucks. At the same time, this secures the chuck against becoming loose during anti-clockwise rotation or being quickly decelerated from higher speeds. Taper angle tolerance: AT3 Hardened: 58 ± 2 HRC Application: To mount tools with cylindrical shank. Scope of delivery: Short drill chuck with hexagon spanner. Clamping range mm d2 mm l1 mm 3088 Order No. SK 40 € 1 –13 50 90 233.00 …0001 1.5–16 50 95 233.00 …0004 (W052) Clamping range mm d2 mm l1 mm 3088 Order No. SK 50 € 1 –13 50 95 310.50 …0007 1.5–16 50 95 310.50 …0010 (W052) CNC short drill chuck for clockwise and anti-clockwise rotation ISO 7388-1 AD/B ≤ 30 µm Design: High-precision chuck extension together with a precision chuck. Very good concentricity. Better vibration damping compared to shrink-fit chucks (due to clamping sleeve compound). Slim contour D1 = 13 mm. Holding torque independent of shank tolerances (as tightening torque is always built up constantly when clamping surfaces are in contact with the shank). Maintenancefree, robust and durable. Sealed against coolant and dirt. Easy clamping by means of a hexagonal wrench (no equipment necessary). Application: Perfect for micro-machining, enables machining in hard-to-reach machining zones. Certainty through trusting in the process for clamping small shank diameters, also under 3 mm. For clamping cylinder shanks in accordance with DIN 1835 A, B and DIN 6535-HB, HA and HE to D = 6 mm. Cylindrical shank ∅ h6 x L mm Shank Clamping range mm 3500 Order No. € 14 x 100 SW 13 1–6 263.50 …1410 14 x 150 SW 13 1–6 277.00 …1415 (W318) Cylindrical shank ∅ h6 x L mm Shank Clamping range mm 3500 Order No. € 20 x 100 SW 13 1–6 277.00 …2010 20 x 150 SW 19 1–6 290.50 …2015 (W318) Precision chuck extension Design: Very resistant special coating. Quick and easy adapter sleeve and tool change. With peripheral cooling, optional central cooling available on request. Clamping range mm 3663 Order No. € 1 168.50 …0001 2 101.50 …0002 3 88.10 …0003 (W318) Clamping range mm 3663 Order No. € 4 88.10 …0004 5 88.10 …0005 6 88.10 …0006 (W318) Precision adapter sleeve for chuck extension Tool holders 3.1
RkJQdWJsaXNoZXIy NTg4MTI=