FORMAT_EN_2023-25_WCT_Light

All prices quoted are non-binding recommended prices. 2/86 Design: HSS Co10, according to factory standard, hardened, annealed, true to size and dressed to size. The ends are straight and non-machined. Hardness approx. 63–68 HRC. Tolerance for form L1: Length: ±2 mm Cross-section: h12/h12 Application: Due to respective grinding, also suitable as a parting tool for parting-off and grooving in tool- and mould-making. h x b mm Total length mm 2787 Order No. € 12–3 85 22.70 …0001 12–3 120 32.40 …0004 12–3 160 44.80 …0007 12–5 120 49.80 …0010 12–5 160 63.70 …0013 16–4 120 58.10 …0016 16–4 160 72.00 …0019 ​ (W266) h x b mm Total length mm 2787 Order No. € 16–4 200 80.30 …0022 18–4 160 69.20 …0025 18–4 200 83.00 …0028 20–3 140 52.60 …0031 20–3 200 77.50 …0034 25–6 160 105.00 …0037 25–6 200 119.00 …0040 ​ (W266) Tool bit, form L1, dual trapezoidal HSS Co10 Tool bit, form E, trapezoidal h x b mm Total length mm 2789 Order No. € 12–3 80 17.15 …0001 12–3 100 22.70 …0004 12–3 125 25.50 …0007 16–4 100 44.30 …0010 ​ (W266) h x b mm Total length mm 2789 Order No. € 16–4 160 72.00 …0013 16–4 200 85.80 …0016 20–5 160 72.50 …0019 25–6 200 130.00 …0022 ​ (W266) Design: HSS Co10, DIN 4964 or ISO 5421, hardened, annealed, true to size and dressed to size. The ends are straight and non-machined. Hardness approx. 63–68 HRC. Tolerance for form E: Length: ±2 mm Cross-section: h12/h12 Application: Due to respective grinding, also suitable as a parting tool for parting-off and grooving in tool- and mould-making. Design: HSS Co10, according to factory standard, hardened, annealed, true to size and dressed to size. Preprofiled on one side (bisection with 0.1 mm measurement), with straight cutting edge (length of cutting edge 1.5 x D). One end not machined. Hardness approx. 63–68 HRC. Tolerance for form A: Length: ±2 mm ∅: h8 Application: Due to respective grinding, also suitable for engraving lettering and contours as well as for contour turning and copy milling in mould and die-making. The pre-profiled bisection is quickly adapted to the required purpose of application by finish-grinding. ∅ h8 mm Cutting edge length mm Total length mm 2791 Order No. € 2 3.5 40 12.95 …0001 2.5 3.7 40 13.95 …0004 3 4.5 63 13.95 …0007 4 6 63 14.30 …0010 4 6 100 17.25 …0013 5 7.5 80 21.30 …0016 6 9 80 21.30 …0019 6 9 100 22.60 …0022 8 12 90 25.60 …0025 ​ (W266) ∅ h8 mm Cutting edge length mm Total length mm 2791 Order No. € 8 12 125 32.60 …0028 10 15 100 38.80 …0031 10 15 125 42.50 …0034 12 18 125 53.80 …0037 12 18 160 75.70 …0040 16 24 160 136.00 …0043 20 30 160 199.50 …0046 20 30 200 232.50 …0049 ​ (W266) D-bit, form A, round HSS Co10 HSS Co10 ​ DIN 4964 ​ - WILKE - WILKE - WILKE Tool bits 22.6

RkJQdWJsaXNoZXIy NTg4MTI=