Additional freight charges may apply for articles over 110 cm. Articles marked with ◊ are not stock items, they are procured at short notice. 2/85 Design: HSS Co10, DIN 4964 or ISO 5421, hardened, annealed, true to size and dressed to size. The ends are perpendicular, straight and non-machined. Hardness approx. 63–68 HRC. Tolerance for form A: Length: ±2 mm ∅: h8 Application: Ground to be suitable for use as a form steel tool for hollowing, boring, engraving and copying in tool- and mould-making. ∅ h8 mm Total length mm 2781 Order No. € 3 63 8.15 …0001 4 63 8.15 …0004 4 80 8.65 …0007 4 100 9.15 …0010 5 80 9.15 …0013 5 100 9.70 …0016 6 80 13.25 …0019 6 100 15.25 …0022 (W266) ∅ h8 mm Total length mm 2781 Order No. € 8 80 13.50 …0025 8 100 16.05 …0028 8 125 19.60 …0031 8 160 24.70 …0034 10 100 17.60 …0037 10 125 23.70 …0040 10 160 28.00 …0043 10 200 35.10 …0046 (W266) ∅ h8 mm Total length mm 2781 Order No. € 12 125 33.60 …0049 12 160 47.40 …0052 12 200 53.50 …0055 16 160 71.30 …0058 16 200 89.10 …0061 20 160 94.20 …0064 20 200 117.00 …0067 (W266) Tool bit, form A, round HSS Co10 DIN 4964 Design: HSS Co10, DIN 4964 or ISO 5421, hardened, annealed, true to size and dressed to size. The ends are perpendicular, straight and non-machined. Hardness approx. 63–68 HRC. Tolerance for form B: Length: ±2 mm Cross-section: h13/h14 Application: Ground to be suitable for use as a form steel tool for hollowing, boring, engraving and copying in tool- and mould-making. h13/h14 mm Total length mm 2783 Order No. € 4 x 4 80 15.80 …0001 5 x 5 80 15.80 …0004 6 x 6 80 15.80 …0007 6 x 6 100 16.30 …0010 8 x 8 63 13.75 …0013 8 x 8 80 15.80 …0016 8 x 8 100 17.30 …0019 8 x 8 125 20.90 …0022 8 x 8 160 29.80 …0025 8 x 8 200 33.60 …0028 10–10 63 23.40 …0031 10–10 80 28.00 …0034 (W266) h13/h14 mm Total length mm 2783 Order No. € 10–10 100 30.50 …0037 10–10 125 33.60 …0040 10–10 160 37.40 …0043 10–10 200 45.80 …0046 12–12 63 23.70 …0049 12–12 80 29.80 …0052 12–12 100 32.60 …0055 12–12 125 37.40 …0058 12–12 160 48.40 …0061 12–12 200 61.10 …0064 16–16 100 40.70 …0067 16–16 125 50.90 …0070 (W266) h13/h14 mm Total length mm 2783 Order No. € 16–16 160 66.20 …0073 16–16 200 81.50 …0076 18–18 200 132.50 …0079 20–20 160 117.00 …0082 20–20 200 140.00 …0085 25–25 160 203.50 …0088 25–25 200 229.00 …0091 (W266) Tool bit, form B, square HSS Co10 DIN 4964 Design: HSS Co10, DIN 4964 or ISO 5421, hardened, annealed, true to size and dressed to size. The ends are perpendicular, straight and non-machined. Hardness approx. 63–68 HRC. Tolerance for form D: Length: ±2 mm Cross-section: h13/h14 Application: Ground to be suitable for use as a form steel tool for hollowing, boring, engraving and copying in tool- and mould-making. h13/h14 mm Total length mm 2785 Order No. € 8–4 100 17.30 …0001 16–4 80 23.40 …0004 16–4 100 28.00 …0007 16–4 160 45.80 …0010 16–4 200 56.00 …0013 10–5 100 23.40 …0016 10–5 160 43.30 …0019 10–6 100 23.40 …0022 (W266) h13/h14 mm Total length mm 2785 Order No. € 10 x 6 160 43.30 …0025 12 x 6 160 38.20 …0028 12 x 6 200 53.50 …0031 25 x 6 160 76.40 …0034 26 x 6 200 94.20 …0037 12 x 8 160 53.50 …0040 12 x 8 200 66.20 …0043 16–10 100 40.70 …0046 (W266) h13/h14 mm Total length mm 2785 Order No. € 16–10 160 66.20 …0049 16–10 200 81.50 …0052 20 x 5 200 58.60 …0055 20–12 160 91.70 …0058 20–12 200 109.50 …0061 25–12 200 140.00 …0064 (W266) Tool bit, form D, flat HSS Co10 DIN 4964 - WILKE - WILKE - WILKE Tool bits 22.6
RkJQdWJsaXNoZXIy NTg4MTI=