FORMAT_EN_2023-25_WCT_Light

Additional freight charges may apply for articles over 110 cm. Articles marked with ◊ are not stock items, they are procured at short notice. 1/25 Design: With precision ground point. The 3-surface shank prevents spinning in the drill chuck and therefore always ensures optimum torque transmission. Application: Suitable for mobile use on hand drills. Suitable for dry machining in steel materials. Use STEEL INOX CAST SPEC. ALLOY NON-FERROUS METAILS HARDENED STEEL Order No. < 700 N/mm2 < 1000 N/mm2 < 1400 N/mm2 ferrite/ martens. Austenitic Duplex GG/ GTS GGG Titanium > 850 N/mm2 Alu < 8% Si Alu > 8% Si Copper/ copper-alloy Graphite GFK/CFK/ Duropl. < 55 HRC < 60 HRC > 60 HRC VC [m/min] 30 20 10 15 12 – 25 20 – 80 50 75 – – – – 1068 ∅ h8 mm Spiral length mm Total length mm STEEL < 700 N/mm2 f mm/rev PU 1068 Order No. € 1* 12 34 0.03 10 2.48 …0100 1.5* 18 40 0.03 10 2.62 …0150 1.6* 20 43 0.03 10 2.62 …0160 2* 24 49 0.03 10 2.62 …0200 2.5* 30 57 0.03 10 2.81 …0250 3* 33 61 0.03 10 2.91 …0300 3.3* 36 65 0.03 10 3.40 …0330 3.5* 39 70 0.03 10 3.40 …0350 4 43 75 0.03 10 3.98 …0400 4.2 43 75 0.05 10 3.98 …0420 4.5 47 80 0.05 10 4.14 …0450 5 52 86 0.05 10 4.26 …0500 5.5 57 86 0.05 10 4.41 …0550 6 57 86 0.05 10 5.00 …0600 6.5 63 101 0.07 10 5.30 …0650 6.8 69 109 0.07 10 5.75 …0680 7 69 109 0.07 10 5.75 …0700 7.5 69 109 0.07 10 5.90 …0750 ​ (W100) ∅ h8 mm Spiral length mm Total length mm STEEL < 700 N/mm2 f mm/rev PU 1068 Order No. € 8 75 117 0.07 5 6.50 …0800 8.5 75 117 0.1 5 7.05 …0850 9 81 125 0.1 5 7.65 …0900 9.5 81 125 0.1 5 8.25 …0950 10 87 133 0.1 5 8.80 …1000 10.2 87 133 0.1 5 9.30 …1020 10.5 87 133 0.1 5 10.25 …1050 11 94 142 0.1 5 12.30 …1100 11.5 94 142 0.1 5 13.80 …1150 12 101 151 0.1 5 15.30 …1200 12.5 101 151 0.15 5 15.85 …1250 13 101 151 0.15 5 17.30 …1300 13.5 108 160 0.15 5 18.85 …1350 14 108 160 0.15 5 19.95 …1400 14.5 114 169 0.15 5 21.50 …1450 15 114 169 0.15 5 22.90 …1500 15.5 120 178 0.15 5 25.00 …1550 16 120 178 0.15 5 26.00 …1600 ​ (W100) Gold Gold Spiral drill, with three-edged shank * With cylinder shank, without three-edged surface area. HSS-E DIN 338 N 130° Gold Set contents Ø h8 mm Quantity of drills piece Increasing mm 1068 Order No. € 1–10 19 0.5 110.50 …1619 1–10.5 24 0.5 + K.B.* 147.00 …1624 ​ (W100) Gold Jobber drill set, with three-edged shank * With intermediate sizes for tapped holes: 1 piece each.∅ 3.3; 4.2; 6.8; 10.2 mm. Gold Drills HSS/HSS-E 1.1

RkJQdWJsaXNoZXIy NTg4MTI=